LG 14CU2AB Owner's Manual

1. Press the main power button to switch the set on.
2. If the set is in standby mode, press the

POWER, 

D

D 

 

E

E

, TV/AV or NUMBER buttons on

the remote control handset to switch it on fully. 

3.  Press the POWER button on the remote con-

trol handset. 
The set reverts to standby mode. 

4. Press the main power button again to switch

the set off. 

Note : If, while the set is switched on, the mains
plug is disconnected the set will switch to standby
or power on when the mains plug is replaced in
the mains power socket.

Press the MUTE button. The sound is switched off
and the display 

appears. 

You can cancel it by pressing the MUTE, 

F

F 

 

G

G

,

(option) button.

The menu can be displayed on the screen in
desired language. First select your language.
1.  Press the MENU button and then 

D

D 

 

E

E 

 

but-

ton to select the Special menu     .

2. Press the 

G

G

button to select 

.

3. Press the 

G

G

button and then 

D

D 

 

E

E

button to

select your desired language.
All the on screen displays will appear in the
selected language.
Press the OK or 

F

F  

button to select the Special

menu.

4. Repeatedly press the MENU button to return

to normal TV viewing.

4

Inputs can be set for TV or AV mode. AV mode is
used when a video cassette recorder (VCR), or
other equipment is connected to the set.
Note : When a VCR is connected via the aerial
socket the set is used in TV mode. See the
‘Connection of external equipment’ section.
Alternatively you can select the TV or AV mode by
pressing the TV/AV button.

In AV mode, to return to TV mode, press the 

D

D 

 

E

E

or NUMBER buttons.

If your VCR outputs switching voltage when it is
switched to playback with the VCR connected to the
Euro scart socket. The set is automatically switched
to 

or 

mode when an AV signal is input. But

if you want to keep on watching TV mode, press the

D

D 

 

E

E 

 

or NUMBER buttons. Press the TV/AV but-

ton to return to AV modes.

The  TV can be set so that the remote control
handset is needed to control it. This feature can
be used to prevent unauthorized viewing.
With the lock on, the display 

appears on the screen if any button on the panel
is pressed while viewing the TV.

Note : The display 

will not appear

on the screen if any button on the panel is
pressed while displaying the menus.

If you select 

on the 

pull-down

menu, the blue background appears on the
screen when there is no or poor signal.
Note : In the AV mode, Component mode, the
blue background doesn’t appear on the screen.

You don’t have to remember to switch the set off
before you go to sleep. The sleep timer automat-
ically switches the set to standby after the preset
time elapses.
Press the SLEEP button to select the number of
minutes. The display 

will appear on the

screen, followed by 

,

, 

, 

, 

, 

, 

and 

. The timer begins to count down from the

number of minutes selected.
Note : 
a. To view the remaining sleep time, press the

SLEEP button once.

b. To cancel the sleep time, repeatedly press the

SLEEP button until the display 

appears.

c. When you switch the set off, the set releases

the preset sleep time.