LG 55LF652V User Guide

Page of 168
12
ENGLISH
•  When installing the wall mounting bracket, use the Adhesive 
Label. The Adhesive Label will protect the opening from 
accumulating dust and dirt. (Only when the item of the following 
form is provided)
Provided Item
Adhesive Label
•  When attaching a wall mounting bracket to the TV, insert the wall 
mount spacers into the TV wall mount holes to adjust the vertical 
angle of the TV.  (Only when the item of the following form is 
provided)
Provided Item
Wall Mount Spacer
Connections (notifications)
Connect various external devices to the TV and switch input modes to 
select an external device. For more information of external device’s 
connection, refer to the manual provided with each device.
Available external devices are: HD receivers, DVD players, VCRs, audio 
systems, USB storage devices, PC, gaming devices, and other external 
devices.
 NOTE
•  The external device connection may differ from the model.
•  Connect external devices to the TV regardless of the order of the 
TV port.
•  If you record a TV program on a DVD recorder or VCR, make sure to 
connect the TV signal input cable to the TV through a DVD recorder 
or VCR. For more information of recording, refer to the manual 
provided with the connected device.
•  Refer to the external equipment’s manual for operating 
instructions.
•  If you connect a gaming device to the TV, use the cable supplied 
with the gaming device.
•  In PC mode, there may be noise associated with the resolution, 
vertical pattern, contrast or brightness. If noise is present, change 
the PC output to another resolution, change the refresh rate to 
another rate or adjust the brightness and contrast on the PICTURE 
menu until the picture is clear.
•  In PC mode, some resolution settings may not work properly 
depending on the graphics card.
Antenna connection
Connect the TV to a wall antenna socket with an RF cable (75 Ω).
•  Use a signal splitter to use more than 2 TVs.
•  If the image quality is poor, install a signal amplifier properly to 
improve the image quality.
•  If the image quality is poor with an antenna connected, try to 
realign the antenna in the correct direction.
•  An antenna cable and converter are not supplied.
•  Supported DTV Audio: MPEG, Dolby Digital, Dolby Digital Plus, 
HE-AAC
Satellite dish connection
(Only satellite models)
Connect the TV to a satellite dish to a satellite socket with a satellite RF 
cable (75 Ω).
CI module connection
(Depending on model)
View the encrypted (pay) services in digital TV mode.
 NOTE
•  Check if the CI module is inserted into the PCMCIA card slot in the 
right direction. If the module is not inserted properly, this can 
cause damage to the TV and the PCMCIA card slot.
•  If the TV does not display any video and audio when CI+ CAM is 
connected, please contact to the Terrestrial/Cable/Satellite Service 
Operator.
Euro scart connection
(Depending on model)
Transmits the video and audio signals from an external device to the 
TV set. Connect the external device and the TV set with the euro scart 
cable as shown.