LG 55UF950V User Guide

Page of 172
ENGLISH
17
Precautions to take when using the 
magic remote
•  Use the remote control within the specified range (within 10 m).  
You may experience communication failures when using the device 
outside the coverage area or if there are obstacles within the 
coverage area.
•  You may experience communication failures depending on the 
accessories. 
Devices such as a microwave oven and wireless LAN operate in the 
same frequency band (2.4 GHz) as the Magic Remote. This may 
cause communication failures.
•  The Magic Remote may not work properly if a wireless router (AP) 
is within 1 meter of the TV. 
Your wireless router should be more than 1 m away from the TV.
•  Do not disassemble or heat the battery.
•  Do not drop the battery. Avoid extreme shocks to the battery.
•  Inserting the battery in the wrong way may result in explosion.
Licenses
Supported licenses may differ by model. For more information about 
licenses, visit www.lg.com.
Open source software 
notice information
To obtain the source code under GPL, LGPL, MPL, and other open source 
licenses, that is contained in this product, please visit http://opensource.
lge.com
.
In addition to the source code, all referred license terms, warranty 
disclaimers and copyright notices are available for download.
LG Electronics will also provide open source code to you on CD-ROM 
for a charge covering the cost of performing such distribution (such 
as the cost of media, shipping, and handling) upon email request to 
opensource@lge.com. This offer is valid for three (3) years from the date 
on which you purchased the product.
Troubleshooting
Cannot control the TV with the remote control.
•  Check the remote control sensor on the product and try again.
•  Check if there is any obstacle between the product and the remote 
control.
•  Check if the batteries are still working and properly installed (   to 
,   to  ).
No image display and no sound is produced.
•  Check if the product is turned on.
•  Check if the power cord is connected to a wall outlet.
•  Check if there is a problem in the wall outlet by connecting other 
products.
The TV turns off suddenly.
•  Check the power control settings. The power supply may be 
interrupted.
•  Check if the Automatic Standby (Depending on model) / Sleep 
Timer / Timer Power Off is activated in the Timers settings.
•  If there is no signal while the TV is on, the TV will turn off 
automatically after 15 minutes of inactivity.
When connecting to the PC (HDMI), ‘No signal’ or ‘Invalid Format’ is 
displayed.
•  Turn the TV off/on using the remote control.
•  Reconnect the HDMI cable.
•  Restart the PC with the TV on.