LG 42LW5500 Owner's Manual

154

ENG

ENGLISH

EXTERNAL CONTROL DEVICE SETUP

24. 3D(Command: x t) (only 3D models)

► To change 3D mode for TV.

Transmission [x][t][ ][Set ID][ ][Data01][ ][Data02]
[ ][Data03][ ][Data04][Cr]

25. Extended 3D(Command: x v) (only 3D models)

► To change 3D option for TV.

Transmission [x][v][ ][Set ID][ ][Data01][ ]
[Data02][Cr]

Data01 00 : 3D On

01 : 3D Off

02 : 3D to 2D

03 : 2D to 3D

Data02 00 : Top and Bottom

01 : Side by Side

02 : Check Board

03 : Frame Sequential

Data03 00 : Right to Left

01 : Left to Right

Data04 3D Depth : Min: 0 ~ Max: 14

* Refer to ‘Real data mapping’.(See p.153)

*If data1 is 00(3D On), data4 has no meaning.

*If data1 is 01(3D off) or 02(3D to 2D), data2, data3 and

data4 have no meaning.

*If data1 is 03(2D to 3D), data2 and data3 have no

meaning.

Data01 : 3D option

00 : 3D Picture Correction

01 : 3D Depth (2D to 3D Only)

02 : 3D Viewpoint

05 : 3D Optimization

Data02 It has own range for each 3D option determined

by Data01.

1) When Data01 is 00

00 : Right to Left

01 : Left to Right

2) When Data01 is 01

Data Min: 0 ~ Max: 14

3) When Data01 is 02

Data Min: 0 ~ Max: 14 (Except for 72LZ97**)

Data value range(0 to 20) converts Viewpoint range(-10

to 10) automatically.

Data Min: 0 ~ Max: 06 (Only 72LZ97**)

Data value range(0 to 20) converts Viewpoint range(-3

to 3) automatically.

4) When Data01 is 05

Data Min: 0 ~ Max: 02

* Refer to ‘Real data mapping’.(See p.153)

Ack [t][ ][OK][Data01][Data02][Data03][Data04][x]
[t][ ][NG][Data01][x]

Ack [v][ ][OK][Data01][Data02][x][v][ ][NG]
[Data01][x]

* Use the feature depending on your model.

Data1

Data2

Data3

Data4

X : don't care