LG 42LW5500 Owner's Manual

The Magic Motion Remote Control operates by 

pairing with your TV.

Register the Magic Motion Remote Control to use.
How to register the Magic Motion Remote Control

To register the remote control, press the 

OK button 

on the remote control while aiming it at your TV.
How to Re-register the Magic Motion Remote 

Reset the remote control by pressing and holding 

both the 

OK and MUTE buttons for 5 seconds. 

(Once the reset is complete, the light on the 

Pointer blinks.) Then repeat the above procedure 

to register the remote control.

1

  Press 

OK button if there is no pointer on your TV 

screen. The pointer will then appear on the screen.

If the pointer has not been used for a certain 

period of time, it will disappear.

2

  You can move the pointer by aiming the Pointer 

Receiver of the remote control at your TV then 

move it left, right, up or down.

If the pointer does not work properly after click-

ing the 

OK button, leave the remote control for 

10 seconds then use it again.

 

y

Use the remote control within the maximum com-

munication distance (10 m). Using the remote 

control beyond this distance, or with an object 

obstructing it, may cause a communication failure.

 

y

A communication failure may occur due to 

nearby devices. Electrical devices such as 

a microwave oven or wireless LAN product 

may cause interference, as this will use the 

same bandwidth (2.4 GHz) as the Magic Mo-

tion Remote Control.

 

y

The Magic Motion Remote Control may be 

damaged or may malfunction if it is dropped 

or receives a heavy impact.

 

y

When playing a game using the Magic 

Motion Remote Control, hold it securely by 

wrapping its strap around your wrist and 

adjusting the length with the adjustable ring.

 

y

Take care not to bump into nearby furniture or other 

people when using the Magic Motion Remote Control.

 

y

Manufacturer and installer cannot provide 

service related to human safety as the ap-

plicable wireless device has possibility of 

electric wave interference.

 

y

It is recommended that an Access Point (AP) 

be located more than 1 m away from the 

TV. If the AP is installed closer than 1 m, the 

magic motion remote control may not perform 

as expected due to frequency interference.

(Only 32/37/42/47LV55**, 32/37/42/47/55LV57**, 

32/37/42/47/55LW55**, 32/37/42/47/55LW57**, 

32/42/47/55LW65**)

Image shown may differ from your TV.

3 

Attach the RF Dongle to the velcro as shown 

below and then turn on the TV.

* If the RF dongle for the wireless media box is at-

tached, attach the RF dongle for the Magic Motion 

remote control on the upper right of the back of the TV.

* To avoid wireless interference, keep the distance 

between the RF dongle for the Magic Motion remote 

control and the Wi-Fi dongle at 20 cm.

1

  Locate the designated Velcro attachment location 

on the TV. Then tear off the protection paper and 

attach the Velcro. (The attachment location is 

different depending on the TV model you own)

or

 

y

Separate purchase : Except for 

32/37/42/47/55LV571S, 32/37/42/47/55LW573S, 

32/37/42/47/55LW575S

* Attach the RF dongle aligning with the upper left 

corner bracket.

2

  Connect the RF Dongle Cable plug on the RF 

Dongle to a USB jack on the TV.

HDD IN USB IN 1

USB Apps USB IN 2

RF Dongle

Velcro

20 cm