LG SA565 User Manual

Connect a USB storage device (external 
HDD or USB flash drive) to the USB 
port of the projector to view multimedia 
content.
You cannot write to or delete data from the 
USB storage device.
Connect a USB flash drive as shown 
below.

USB flash drive

 Press the 

Q.MENU button.

 Use the   or   button to move 

to 

USB Device and press the OK 

button.

 Remove the USB device.

 

y

After the USB storage device is 

disconnected, it cannot be read. 

Remove the USB storage device 

and connect it again.

 

y

A USB storage device installed using 
an automatic recognition program 
or its own driver might not be 
recognizable.

 

y

Some USB devices may not be 
supported or will not work properly.

 

y

Please use only a USB storage 
device formatted as a FAT32 or NTFS 
file system provided by Windows.

 

y

It is recommended to use an external 
USB hard disk with rated voltage of 5 V 
or less and rated current of 500 mA or 
less. 

 

y

It is recommended to use a USB hub 
or hard disk drive with its own power 
supply. (If the power supplied is not 
enough, the USB storage device may 
not be detected properly.)

 

y

It is recommended to use a USB flash 
drive which is 32 GB or less and a 
USB hard drive which is 2 TB or less.

 

y

If a USB external hard drive with the 
power saving function does not work, 
turn the hard drive off and on again 
to make it work properly. See the 
owner's manual of the USB hard drive 
for more information.

 

y

The data of a USB device may be 
damaged, so it is recommended to 
backup any important files. Users are 
responsible for data management. 
The manufacturer bears no 
responsibility.