Fujitsu Primergy RX300 S2 LKN:INT-937144-001 Leaflet

Product codes
LKN:INT-937144-001
Page of 2
Data Sheet 
⏐ Issue: 3/29/2006⏐ PRIMERGY RX300 S2 
Page 2 / 2 
 
Type 
Dual Processor/Socket Rack Server  
System board  
D 1889 / D 2089 (only for Dual-Core) 
  Chip set 
Intel® E7520 
  Processors 
64-bit Intel® Xeon™ (1 - 2) 
  Frequencies (GHz) 
2.80,3.00,3.20,3.40,3.60, 3.80 / 
Dual-Core 2.80 
  Front-Side-Bus  
800 / 800 MHz 
  Second-Level-Cache  
2 Mbyte / 2x 2 MB, ECC 
Memory 
1 Gbyte up to max. 16 Gbyte 
2-way interleaved, registered ECC DDR2-400 SDRAM; 4 banks 
with 2 slots each for PC2-3200 modules with 512, 1 and 2 Gbyte; 
Memory Scrubbing, Chipkill™, Hot-spare Memory option and 
Memory Mirroring option 
Flash-EPROM 
Local BIOS update with floppy disk; Remote BIOS-Update via 
LAN with Global Flash and service partition or through 
chipDISK/RTDS via modem 
Interfaces  
  Serial 
1x RS-232-C (9-pin) (usable for BMC 
 or OS or shared) 
  Serial 
1x RS-232-C (9-pin) 
  Parallel (option) 
Centronics, 25-pin, EPP/ECP comp. 
  Keyboard, Mouse 
2x PS/2  
  USB 2.0 
2x front, 2x back; (OHCI, 480 Mbit/s) 
  Graphics 
1x VGA (15-pin) 
  LAN 
2x RJ45 
  SCSI (option) 
external Ultra320 SCSI, 68-pin 
Front Panel 
On/off switch; NMI-, reset button; LEDs for system status 
(amber), identification (blue), hard disks access (green), power 
(amber/green); (back: system status, identification) 
Onboard controller ** 
  IDE (ATA100) 
for 1 x CD / DVD plus 1 x RemoteView 
  SCSI (LSI53C1030) 
2-channel Ultra320 SCSI with RAID 
level 1 (Integrated Mirroring Enhanced 
also for odd numbered HD´s) (for 
Windows and Linux) 
  MegaRaid PCI  
  Express™  
  RoMB (options) 
RAID level 0, 1, 10, 5, 50 extension for 
onboard SCSI/RAID controller with 256 
MB, or 128 MB / 256 MB RAID cache 
(both with ITBBU) and iButton enable 
key 
  LAN (BroadCom5721)   2x 10/100/1000 Mbit/s Ethernet 
(PCE-Boot via LAN from PXE server)  
  Graphics 
ATI Rage XL 8 MB  
  Server management 
Baseboard Management Controller 
(BMC), IPMI 1.5 compatible 
Hard disk drives 
36, 73, 146, 300 Gbyte,U320 SCSI 
1 Gbyte equals one billion bytes when referring to hard disk drive capacity; accessible 
capacity may vary. 
I/O Slots (Standard) 
  3 x PCI-X 64-bit / 100 MHz, low profile; 3.3 V 
  (with IOOP™ bus 1 x 133MHz if only slot 3 is used) 
  2 x PCI-X 64-bit / 133 MHz, low profile; 3.3 V hot-plug 
I/O Slots (risercard option) 
  1 x PCI-X 64-bit / 100 MHz, long, full height;  
  2 x PCI-X 64-bit / 100 MHz, short, full height 
Drive bays  
  for hard disks  
6x 3.5/1-inch, slide-in chassis;  
over 1 or 2 SCSI channels (option)  
  for accessible drives 
1x 5.25/0.5-inch, for CD or DVD;  
1x 3.5/0.5-inch, for FD drive or 
LocalView display option 
  for optional  
  accessible drives 
1x 3.5/2-inch for hot-plug tape drive, 
requires 2 hard disk bays  
System fan units (hot-plug) 
Standard / redundant (option):  1 + 1 units, 4 fans each 
All rights, including rights created by patent grant or registration of a utility model or design as well 
as rights of technical modifications are reserved. Delivery subject to availability. Designations may 
be trademarks, the use of which by third parties for their own purposes may violate the rights of the 
trademark owners. 
 
Copyright 
© Fujitsu Siemens Computers, 03/2006 
  Published by  
 
Fujitsu Siemens Computers 
http://www.fujitsu-siemens.com/
Company stamp 
 
 
 
Electrical values  
1x Hot-plug power supply unit as standard.  
Additional hot-plug unit for redundancy option  
  Output power 
600 W  /  1 + 1 x 600 W  each 
  Rated voltage range 
100 - 240 V  
  Rated frequency 
50-60 Hz  
  Max. rated current  
100 V - 240 V / 8 A – 3 A 
  Rated current in basic  
  configuration 
100 V - 240 V / 4.2 A - 1.4 A  
  Active power 
 681 W   
  Apparent power 
 689 VA   
  Heat emission 
2452 kJ/h (2324 btu/h)  
Temperature/Noise/Dimension/Weight 
  Ambient temperature 
10°C - 35°C (EN60721-3-3 class 3K2)
  Sound pressure L
pAm 
 <=  57 dB (A) (ISO9296)  
  Sound power L
WAd
 <= 7.1 B (ISO9296) 
  Overall measures  
85.9 * 482.6 * 785 (mm); (HxWxD) 
  Rack mount depth / U:  
  Rack cable depth: 
745 mm / 2 U,  
100 mm (900mm Rack 
recommended) 
  Rack integration kit 
inclusive telescopic rails as part of the 
standard delivery  
  Weight  
~ 25 kg (configuration dependent) 
Compliance with Norm and Standards  
 Product safety 
  Global / Europe 
IEC 60950-1 / EN 60950-1 
  USA 
UL 60950 3rd. Ed. 
  Canada 
CAN/CSA-C22.2 No. 60950 3rd. Ed. 
 Electro magnetic compatibility 
  Europe 
EN 55 022 class A, EN 55024,  
EN 61000-3-2 / -3-3 
  Taiwan / Japan 
BSMI class A; VCCI class A /JEIDA 
  Australia / New Zealand  C-Tick class A 
  USA / Canada 
FCC class A 
 Declaration of conformity                
  Europe (CE)  
89/336/EEC(EMV);73/23 EEC(LVD) 
  North America  
FCC class A  
Approvals  
 Product safety  
  Global  /  Europe 
CB  /  CE 
  USA / Canada 
CSA
US
 / CSA
C
There is general compliance with the safety requirements of all 
European countries and North America. National approvals 
required in order to satisfy statutory regulations or for other 
reasons, can be applied for on request. 
Supported operating systems 
  Microsoft: Windows 2003 Standard, Enterprise IA32 Edition;  
  Microsoft: Windows 2003 Standard, Enterprise x64 Edition;  
  Microsoft Windows 2003 Web Edition 
  Microsoft: Windows 2000 Advanced Server; Server 
  Novell: NetWare 6.5 
  VMware: ESX Server 2.5.2 
  SCO: UnixWare 7.1.4; Open Server 5.0.7 
  SUSE:  Enterprise Server 8 for X86 and 9 x86 / EM64T  
              Linux 9.1, 9.3 for X86 
  Red Hat: Enterprise Linux 2.1; 3 and 4 for X86 / EM64T 
** For supported controllers (onboard and PCI cards for SCSI, 
RAID, LAN, WAN, etc.), please refer to the corresponding system 
configurator. 
Server Management (see separate data sheets) 
  Standard:  
PRIMERGY ServerView Suite;  
PDA, ASR&R  
  Optional: 
RemoteView with IDE chipDISK and 
RemoteView Service Board (RSB S2)