LG 600942 User Manual

Page of 38
ENGLISH
10
Feed water pipe installation (Dispenser model only)
Door height adjustment
▪Automatic ice maker operation needs water pressure of 147~834kPa  
(1.5~8.5kgf/cm2) (The pressure is correct when an instant paper cup (180cc) is 
filled in 3 sec.).
▪If water pressure does not reach the rating 147kPa(1.5kgf/cm
2
) or below, it  
is necessary to purchase a separate pressure pump for normal automatic icing 
and cool water feed.
▪Keep the total length of the feed water pipe tube within 8m and be careful that 
the tube does not bend. If the tube is 8m or longer it may cause water feed prob-
lems owing to the drain water pressure.
▪Install the feed water pipe tube at a place free from heat.
▪Connect to drinking water supply only.
▪Refer to instructions with water filter kit for installation.
Level the door by inserting flat( - type) driver into the groove of the left height 
adjusting screw and rotate it clockwise (   ).
Level the door by inserting flat( - type) driver into the groove of the left height 
adjusting screw and rotate it clockwise (   ).
Before  
installation
If the freezer  
compartment 
door is lower than 
the refrigerator  
compartment 
door
If the freezer  
compartment 
door is higher than 
the  refrigerator  
compartment 
door
Height difference
Height difference
Height
difference
Height
difference
Left height  
adjustment screw
Right height  
adjustment screw
Warning
Installation
Installation