LG BH9420P User Manual

34

S

ys

tem  Se

tting

Each disc has a variety of audio output options. Set 
the player’s Audio options according to the type of 
audio system you use. 

Since many factors affect the type of audio 
output, see “Audio Output Specifications” on 
page 71 for details.

 

,

Note

[PCM Stereo] (HDMI only)
Select if you connect this unit’s HDMI OUT jack 
to a device with two-channel digital stereo 
decoder. 

[PCM Multi-Ch] (HDMI only)
Select if you connect this unit’s HDMI OUT jack 
to a device with multi-channel digital decoder. 

[DTS Re-Encode] (HDMI only)
Select if you connect this unit’s HDMI OUT jack 
to a device with DTS decoder. 

[BitStream] (HDMI only)
Select if you connect this unit’s HDMI OUT jack 
to a device with LPCM, Dolby Digital, Dolby 
Digital Plus, Dolby TrueHD, DTS and DTS-HD 
decoder.

 

y When [Digital Output] option is set to [PCM 

Multi-Ch], the audio may output as PCM 
Stereo if the PCM Multi-Ch information is 
not detected from HDMI device with EDID.

 

y If the [Digital Output] option is set to [DTS 

Re-Encode], the DTS Re-Encode audio is 
outputted for BD-ROM discs with secondary 
audio and the original audio is outputted 
for the other discs (like [BitStream]).

 

y This setting is not available on the input 

signal from an external device.

 

,

Note

To obtain the best possible sound, use the speaker 
setup display to specify the volume of the speakers 
you have connected and their distance from your 
listening position. Use the test to adjust the volume 
of the speakers to the same level.

[Speaker]
Select a speaker that you want to adjust.

[Volume]
Adjust the output level of each speaker. 

[Distance]
Adjust the distance between each speaker and 
the listening position.

[Test/ Stop test tone]
The speakers will emit a test tone. 

[OK]
Confirms the setting.

[Cancel]
Cancels the setting.