LG 40121 Owner's Manual

25

Your Washer is equipped with a filter that helps prevent excess
lint and foreign objects like buttons, keys, and coins from
causing damage to the pump. If the washer fails to drain
properly, unplug the washer and allow the water to cool, if
necessary, before proceeding.

1. Open the drain pump filter access panel.

3. Remove the plug from the drain hose, and allow the water to

drain completely.

NOTE: If there is a large amount of water in the tub, you may
have to empty your container several times.

2. Unclip the drain hose and pull it out. Place the end of the

drain hose into a shallow pan or a floor drain. Use care not to
pull the hose out too far or it may not drain properly.

4. Twist the pump filter counterclockwise to remove. Remove

any lint and foreign objects from the pump filter.
Reverse the procedures described in the steps above to
reinstall the filter and drain plug.  Be sure to close the cover.

Plug

Pump Filter

Drain Hose