LG LDE3011ST Owner's Manual

O P E R AT I N G   I N S T RU C T I O N S

20

You may find that your new oven cooks differently than
the one it replaced. Use your new oven for a few weeks
to become more familiar with it. If you still think your new
oven is too hot or too cold, you can adjust the thermostat
yourself.
Do not use thermometers,such as those found in grocery
stores, to check the temperature setting of your oven.
These thermometers may vary 20–40 degrees.

NOTE:
This adjustment will not affect the broiling or the Self
Clean temperatures. The adjustment will be retained in
memory after a power failure.
The oven temperature can be increased (+) or
decreased (-) as much as 35°F or 19°C.

NOTE:
Once the temperature is increased or decreased, the
display will show the adjusted temperature until it is
readjusted.

Touch 

SETTING pad 1 times for

the lower oven, "L-AJ" will appear
in the display.

Using the number pad enter the
temperature correction you wish to
adjust. Example: To adjust the
oven temperature UP 15 degrees,
touch 15.

Touch 

START pad to accept the

change.

To lower the oven temperature
enter 

15 then touch SETTING pad

to DECREASE the temperature,
(for - value).

Touch 

START pad to accept the

change.

Touch 

SETTING pad 2 times for

the lower oven, “U-AJ" will appear
in the display.

Using the number pad enter the
temperature correction you wish to
adjust.
Example: To adjust the oven
temperature UP 15 degrees, 
touch 15.

Touch 

START pad to accept the

change.

To lower the oven temperature
enter 

15 then touch SETTING pad

to DECREASE the temperature,
(for - value).

Touch 

START pad to accept the

change.

Your new touch pad control has additional features that you may choose to use. The following pages describe these
features and how you may activate them.
The special feature modes can only be activated while the display is showing the time of day.
They remain in the control’s memory until the steps are repeated.
When the display shows your choice, touch the 

START pad. The special features will remain in memory after a

power failure.

LOCKOUT

LOCKOUT

LOCKOUT

LOCKOUT