LG Video Wall Owner's Manual

Your Monitor set supports the Plug & Play* feature.

* Plug & Play: A PC will have a built-in driver for 
the monitor, no extra software is needed.

 

y

Connect the signal 
input cable and tighten 
it by turning the screws 
clockwise.

 

y

Do not press the screen with your finger for 
a long time as this may result in temporary 
distortion on the screen.

 

y

Avoid displaying a fixed image on the 
screen for a long period of time to prevent 
image burn. Use a screensaver if possible.

Transmits the analog video signal from your PC to
the Monitor set. Connect the PC and the Monitor
set with the 15 pin signal cable as shown in the 
following illustrations. Select RGB input.

 

y

Use the standard Macintosh 

adapter since an incompatible 
adapter  is  available  in  the 
market.  (Different  signaling 
system)

 

y

Apple computers may require an adapter to 
connect to this monitor. Call or visit their web 
site for more information.

 

y

It is recommended to use the Monitor set 
with the HDMI connection for the best image 
quality.

 

y

To comply with the specifications of the 
product, use a shielded interface cable with 
ferrite core, such as D-sub 15 pin cable and 
DVI/HDMI cable provided with the product.

 

y

If you turn the Monitor set on when the set 
becomes cold, the screen may flicker. This 
is normal.

 

y

Some red, green, or blue spots may appear 
on the screen. This is normal.

PC

Back of the product.

Macintosh Adapter 
(not included)

(not included)

PC/MAC