LG 14CU2AB Owner's Manual

Before operating your TV, make sure the following
instructions have been completed.
• Your TV has been connected to an antenna or a

cable system.

• Your TV has been plugged in a power outlet.
• In this manual, the OSD (On Screen Display)

may be different from your TV’s because it is just
an example to help you with the TV operation.

Press the POWER (or ON/OFF) button on the set.
At this time, the set switches to standby mode and
the standby indicator lights up in red.
To switch the TV on from standby mode, press
the TV/VIDEO, CH 

D

/

E 

button on the set or

POWER, TV/VIDEO, CH 

D

/

E

or number button

on the remote control.
A channel number will be displayed on the screen.
The on-screen display will disappear after a few
seconds.
Press the POWER button on the remote control. It
reverts to standby mode.
To switch the TV off, press the POWER button on 
the set.

1. Press the MENU button and then 

D

/

E

button

until the menu is displayed.

2. Press the 

G 

and then 

D

/

E

button to select

.

3. Press the 

G

and then use 

D

/

E 

button to

select the desired language.
From this point on, the on-screen display will be
presented in the language of your choice.

4. Repeatedly press the MENU button to exit.

This is the function to memorize all the active
channels in your area before you can use the TV.
There are two ways of memorizing channels. You
can use either.
One is called AUTO PROGRAM and the other is
called MANUAL PROGRAM.
In  AUTO PROGRAM the TV will memorize the
channels in ascending order. If there are
additional channels you want to add or delete, you
can manually add or delete those channels.
number buttons (0 ~ 9) to change as .

AUTO PROGRAM searches and memorizes all
the active channels in your area then you can

select the desired channel with the 

D

/

E

buttons.

You can conveniently perform AUTO PROGRAM
using the AUTOPRG. button on the remote control.
1. Press the AUTOPRG. button. 
2. Press the 

G

or AUTOPRG. button.

The AUTO PROGRAM starts now.

If you want to stop auto programming, press the
OK (

A

) button.Only the channels searched up to

that time are memorized.
Notes : • If the programmed signal has poor 
quality, memorize again in the 

.

•AUTO PROGRAM stores all receivable channels 
regardless of receiving signal (RF, Cable).
•If channels of general wireless TV and cable TV are 
duplicated, press the number buttons (0 ~ 9) to 
change as .

You can conveniently perform MANUAL
PROGRAM using the MEMORY / ERASE button
on the remote control.
1. Press the 

D

/

E

or NUMBER buttons to select the

channel number you want to memorize or erase.

2. Press the MEMORY/ERASE button to select

or 

.The on screen display

appears.

Press the 

D

/

E

button to conveniently select the

upper or lower channel then the channel being
viewed, or NUMBER buttons to directly select the
desired channel.

Press the

G

button to increase the volume level or

F

button to decrease the volume level.

To mute the sound, Press the MUTE button.
The word 

is displayed.

It's convenient when you get the telephone calls.
To restore the muted sound, press the MUTE
button again or VOL 

F

/

G

button.

5

Channels of general wireless TV

Channels of Cable TV

o

Volume

15

+++++++

EE

Mute