LG 32SE3KB-B User Manual

22

Picture ID is used to change the settings of a 
specific display using a single IR receiver for 
multi-vision. The set receiving the IR signal 
communicates with another set via an RS-232C 
connection. Each set is identified by a Set ID. If you 
assign the Picture ID using the remote control, only 
displays with the same Picture ID and Set ID can be 
controlled remotely.

1

 Press the red ON button on the remote control 

to assign the Picture ID.

2

  To change the Picture ID, press the ON 

button, or the left and right arrow buttons 
continuously. Assign the ID you want.

 •

If you assign the Set ID to each set with multi-
vision, and then assign the Picture ID using 
the red button on the remote control, the key 
command is displayed for the set with the same 
Set ID and Picture ID. A set with different Set 
IDs and Picture IDs cannot be controlled by IR 
signals.

 •

For example, if the Picture ID is assigned to 
2, the upper right display (Set ID: 2) can be 
controlled by IR signals.

 •

For each set, you can change the settings for 
the PICTURE, AUDIO, TIME, NETWORK and MY 
MEDIA menus or the hot keys on the remote 
control.

 •

 If you press the green OFF button for Picture IDs, 
the Picture IDs for all sets are turned off. If you 
then press any button on the remote control, all 
sets will start working again.

 •

Picture ID will be disabled while using the MY 
MEDIA menu.

2X2 Multi-Vision

Set IDs are assigned as shown in the picture.

IR Receiver

Picture ID

Close

           Off