LG A12AWU Owner's Manual

Delay off timer

Delay on timer

Delay off and on timer

Delay on and off timer

1. Press the SLEEP MODE AUTO BUTTON to set the time when you want the unit to stop automatically.
2. The timer is programmed in one-hour increments by pressing the SLEEP MODE AUTO BUTTON 1 to 7

times. 
The sleep mode is available for 1 to 7 times. 
To alter the time period in steps of 1 hour, press the SLEEP MODE AUTO BUTTON while aiming at air
conditioner.

• The sleep mode will operate indoor fan at slow speed in cooling and heating mode for pleasant sleep.
• Art Cool and Art Cool Wide (non-Deluxe) close the lower discharge partially in sleep mode for pleasant sleep.

In cooling mode or healthy dehumidification mode:
The setting temperature will rise automatically two times by 1°C over next consecutive 30 minutes (2°C in 1
hour) for a comfortable sleep. Now this will be the final setting temperature as long as sleep mode is functioning.

1. Time can be set only when you press the RESET BUTTON. Having replacing the batteries, 

you should press the RESET BUTTON to reset the time. Press the Start/Stop button.

2. Press 2nd F button and check if           icon is on.

3. Press the TIME SETTING BUTTONS until the desired time is set.

4. Press the TIME SET/CANCEL BUTTON.

Check the indicator for A.M. and P.M.

1. Make sure to set current time correctly on the display of the remote controller.

2. Press 2nd F button.

3. Press the ON/OFF TIMER BUTTONS to turn timer on or off.

4. Press the TIME SETTING BUTTONS until the desired time is set.

5. To set the selected time, press the TIMER SETTING BUTTONS aiming the remote controller at the 

signal receptor.

To cancel the timer setting
Check if            icon is off.
Press the TIMER CANCEL BUTTON aiming the remote controller at the signal receptor.
(The timer lamp on the air conditioner and the display will go off.)

Select one of the following four types of operation.

ON

OFF

CANCEL

SET

CANCEL

SET

CANCEL

SET