Omnitron iConverter 1-Module Redundant 8246-111-W User Manual
Product codes
8246-111-W
iConverter
iConverter
®
1-Module
■
iConverter Redundant Power Chassis with
dual redundant power source options
Supports the following Power Options:
■
Power-over-Ethernet (IEEE 802.3af PoE/PD)
■
Low Voltage DC Power 9-24VDC (terminal or
■
universal AC/DC adapter available)
High Voltage DC Power 24-60VDC
■
Two (2) optional 10/100 configurable Ethernet ports
■
Four (4) optional contact closure alarm sensors
■
Managed via an installed
■
iConverter Media Converter
with Integrated Management (such as a 10/100M2)
Management supports Monitoring, Remote
■
Configuration and Trap Notification
Features Dying Gasp Trap support
■
Commercial (0 to 50
■
O
C), wide (-40
O
to 60
O
C) and
extended (-40
O
to 75
O
C) temperature ranges
Lifetime Warranty and free 24/7 Technical Support
■
iConverter
1-Module Redundant Power Chassis
with Power-over-Ethernet (PoE) Option
The iConverter 1-Module Redundant Power Chassis is ideal
for mission-critical Customer Premises (CP) Ethernet services,
and in applications where the monitoring of external events
is required.
The chassis supports multiple power sources, configurable
10/100 Ethernet ports and a wide variety of alarm options.
Power source options feature load-sharing combinations of
Power-over-Ethernet (PoE), 9-24VDC and 24-60VDC. The
PoE option is designed for applications where the converter
chassis must be physically located where power is unavailable
or is costly to install. Power is provided to one of the chassis’
optional 10/100 network ports from a Power Source Equipment
(PoE/PSE) such as a switch or a Mid-Span power injecting
device.
The 9-24VDC power sources can be connected via barrel-style
or terminal connectors. The barrel-style connector versions are
shipped with US or universal AC/DC power adapters.
The two optional 10/100 RJ-45 network ports are available with
PoE optional on one of the ports. Auto-negotiation, 10/100 and
Half/Full-Duplex modes can be configured for each port.
Four optional contact-closure alarm sensors are available
for monitoring external events. These sensors can be used
to monitor a backup battery, the state of an enclosure’s door
or other environmental device states. An SNMP trap can be
selectively generated upon the occurrence of any of these
monitored events.
The chassis can be remotely managed when an iConverter
module with integrated management (such as the 10/100M2)
is installed in the chassis. The management module provides
monitoring, remote configuration and trap notification.
The monitoring of external events, redundant power, PoE
and 10/100 network ports make the iConverter 1-Module
Redundant Power Chassis ideal for mission-critical Service
Provider and Enterprise network applications.
*Module not included
Key Features