LG 42LT650H Owner's Manual

ASSEMBLING AND PREPARING

 

y

When attaching the stand to the TV 
set, place the screen facing down on a 
cushioned table or flat surface to protect the 
screen from scratches.

 

y

Make sure that the screws are inserted 
correctly and fastened securely. If they are 
not fastened securely enough, the TV may 
tilt forward after being installed. 
Do not use too much force and over tighten 
the screws; otherwise screw may be 
damaged and not tighten correctly.

 

y

Remove the stand before installing the TV 
on a wall mount by performing the stand 
attachment in reverse.

1 

Lift and tilt the TV into its upright position on a 
table.
 - Leave a 10 cm (minimum) space from the 

wall for proper ventilation.

10 cm

10 cm

10 cm

10 cm

2 

Connect the power cord to a wall outlet.

 

y

Do not place the TV near or on sources of  
heat, as this may result in fire or other  
damage.

Image shown may differ from your TV.
The TV must be attached to desk so it cannot be

pulled in a forward/backward direction, potentially

causing injury or damaging the product.
(Only 32/37/42/47LT64**, 

32/37/42/47LT65**,

32/37/42/47LT74**, 

32/37/42/47LT76**

)

(not provided as parts of the product)

4-Screws

Stand

Table

Screws: 

M5 x L

 (*L: Table depth + 8-10 mm)

ex) Table depth: 15 mm, Screw: 

M5 x 25

(Only 32/37/42/47LT64

**,

 

32/37/42/47LT65**,  

32/37/42/47LT74**,

 32/37/42/47LT76**

,

32/42LS34**)

Fix the TV to a table to prevent from tilting forward, 

damage, and potential injury.

Mount the TV on a table, and then insert and 

tighten the supplied screw on the rear of the stand.

 

 

y

To prevent TV from falling over, the TV 

should be securely attached to the floor/

wall per installation instructions. Tipping, 

shaking, or rocking the TV may cause injury.