Omnitron iConverter GX/T 8531-2 Leaflet
Product codes
8531-2
iConverter
iConverter
®
10/100/1000 UTP to Gigabit fiber media converter
■
Conforms to 10BASE-T, 100BASE-TX, 1000BASE-T
■
and 1000BASE-X specifications
Supports VLANs, Port Access Control and MIB statistics
■
Fiber port supports multimode, single-mode, and single-
■
fiber with SC, LC and MT-RJ connectors
UTP port supports 10/100/1000 and Half/Full-Duplex
■
auto-negotiation
Ethernet backplane ports for connectivity to adjacent
■
modules
User-selectable link fault detection modes facilitate
■
quick fault detection, isolation and reporting
Management is available with the addition of a
■
management module to the chassis
SNMP management via
■
NetOutlook
®
provides real-
time port and module information, remote parameter
configuration and trap notification
Modules are hot-swappable in 19-Module, 5-Module,
■
2-Module or 1-Module chassis
Lifetime Warranty and free 24/7 Technical Support
■
iConverter
GX/T
10/100/1000 UTP to 1000X Managed Ethernet Media Converter
The iConverter GX/T media converters are members of
the modular iConverter product family. The GX/T provides
10/100/1000 UTP copper to GigE fiber conversion and can
be used in a managed or unmanaged fashion.
The GX/T is ideal in network core or Central Office (CO)
applications when conversion is required from a 10/100/1000
core switch to GigE fiber, and in edge applications when the
GigE fiber is converted back into 10/100/1000 copper and
delivered to a departmental or Customer Premise (CPE)
switch.
The fiber port of the GX/T is available with multimode, single-
mode and single-fiber and supports SC, MT-RJ and LC
connectors.
The UTP port supports 10/100/1000 and Half/Full-Duplex
auto-negotiation with both hardware and software manual
override controls.
The GX/T features two 10/100 Ethernet backplane ports to
provide connectivity to adjacent modules for network expansion
and for in-band connectivity to an iConverter Network
Management Module (NMM2).
Advanced features include VLAN, which allows network
managers control the traffic flow between the UTP, fiber and
backplane ports to enhance security, and Port Access Control,
which provides the ability to enable or disable individual ports
to control delivery of services to customers. The GX/T also
supports port level MIB statistics reporting a real-time packet
statistics to provide performance and operational monitoring.
The GX/T features user-selectable Link Propagate, Link
Segment, Remote Fault Detection and Symmetrical Fault
Detection modes to facilitate quick fault detection, isolation
and reporting.
iConverter GX/T modules are hot-swappable and can be
mounted in a 19-Module (2U high) or 5-Module (1U high) rack-
mountable chassis (19-inch or 23-inch) with any combination
of redundant AC, 24VDC or 48VDC power supplies. They can
also be mounted in a 2-Module AC or 18 to 60VDC powered
chassis, or in a 1-Module AC/DC powered chassis.
Key Features