Omnitron iConverter 10/100VT 8803-1 Leaflet
Product codes
8803-1
iConverter
iConverter
®
10BASE-T or 100BASE-TX to Fast Ethernet fiber
■
converter with 1536 bytes maximum frame size
Supports IEEE 802.1Q Tag VLAN (with Q-in-Q) and
■
Port VLAN
Supports IEEE 802.1p Prioritization QoS
■
Individual Port Bandwidth and Port Access Controls
■
Per port MIB statistics
■
Flash-upgradable memory
■
Fiber port supports multimode, single-mode, and single-
■
fiber with ST, SC, MT-RJ and LC connectors
UTP port supports auto-crossover, with 10/100 and
■
Half/Full-Duplex auto-negotiation or forced setting
Ethernet backplane ports for in-band management and
■
expansion to adjacent modules
User-selectable link fault detection modes facilitate
■
quick fault detection, isolation and reporting
Management is available with the addition of a
■
management module to the chassis
SNMP management via
■
NetOutlook
®
provides real-time
port status, parameter configuration and trap notification
Hot-swappable in a 19-Module, 5-Module, 2-Module or
■
1-Module chassis
Lifetime Warranty and free 24/7 Technical Support
■
iConverter
10/100VT
10/100 VLAN Managed Ethernet Media Converter
The iConverter 10/100VT managed media converters are
members of the modular iConverter product family, and
provide UTP to Fiber conversion as well as 10/100 UTP rate
conversion.
The iConverter 10/100VT supports the IEEE 802.1Q and
802.1p standards. It supports the 802.1Q VLAN packet tagging
and untagging for segregating data in Enterprise networks,
and enabling secure separation of Service Provider network
management and customer data to improve security and
intrusion protection.
The 802.1p Q-in-Q stacked tags enable Service Providers to
offer to their customers secure Ethernet Virtual Private Line
services which isolates each customer’s data traffic, as well
as the Service Provider’s management traffic.
The 10/100VT supports the 802.1p prioritization for the delivery
of Quality of Service (QoS) to real-time applications such as
voice or video over Ethernet.
Port VLAN enables the network administrator to specify
and restrict traffic flow between the module’s fiber, UTP and
backplane ports to improve security and intrusion protection.
The iConverter 10/100VT supports Bandwidth and Port
Access Controls. Bandwidth Control enables the network
administrator to selectively allocate eight different levels of traffic
bandwidth to different ports. Port Access Control allows for the
remote enabling and disabling of individual port access, and
maintains port configuration to easily re-enable access.
The iConverter 10/100VT supports multimode, single-mode, and
single-fiber and features ST, SC, MT-RJ and LC connectors.
The UTP port supports 10/100 and Half/Full-Duplex auto-
negotiation with both hardware and software manual override
controls. The 10/100VT also features two Ethernet backplane
ports to provide connectivity to adjacent modules for network
expansion and for in-band connectivity to an iConverter Network
Management Module (NMM2).
The 10/100VT features user-selectable link fault detection
modes to facilitate quick fault detection, isolation and
reporting.
iConverter
iConverter
10/100VT modules are hot-swappable and can be
mounted in a 19-Module (2U high) or 5-Module (1U high) rack-
mountable chassis (19-inch or 23-inch) with any combination
of redundant AC, 24VDC or 48VDC power supplies. It can
also be mounted in a 2-Module AC or 18 to 60VDC powered
chassis, or in a 1-Module AC/DC powered chassis.
Key Features