Omnitron FlexPoint 100FF 4410-2 Leaflet
Product codes
4410-2
FlexPoint
FlexPoint
TM
FlexPoint
100FF
Single-mode to Multimode Fiber Converters for Fast Ethernet
The FlexPoint 100FF is a protocol-independent fiber converter
that provides reliable and cost-effective extension of network
distances by connecting multimode fiber networks or devices
over single-mode fiber cabling.
No manual configuration is required with the plug-and-play
FlexPoint 100FF. Connect the fiber cables to the appropriate
interface and the installation is complete.
The FlexPoint 100FF is designed to operate with a constant
rate signal between 1Mbps to 100Mbps allowing the converter
to be used in Ethernet networks as well as other fiber-to-fiber
protocol applications.
The fiber port operates at 850nm, 1310nm or 1550nm and
features SC or ST connectors. Multimode fiber models
support distances of up to 5km, and single-mode fiber models
support distances of up to 120km.
The FlexPoint 100FF features descriptions of the LED
indicators on the label for easy in-the-field installation and
maintenance. The LEDs report the availability of power and
the detection of devices attached to the fiber ports.
FlexPoint modules can be mounted utilizing optional wall-
mounting hardware or with DIN-rail mounting brackets. They
can also be rack-mounted in a 5-Module shelf or in a high-
density 14-Module, power-redundant Powered Chassis.
FlexPoint modules installed in the 5-Module shelf or used
as standalone devices can be powered by an external AC to
DC power adapter, or through the 5VDC chassis connector.
Standalone modules can also be powered by attaching an
external DC power supply (18-60VDC). When used in the
14-Module power-redundant Powered Chassis with any
combination of AC and DC power supplies, the installed
modules are powered via the 5VDC chassis connector.
The wide variety of FlexPoint mounting and power options
provide flexible upgrade paths as network requirements
change and grow.
FlexPoint unmanaged media converters are easy to use
and provide dependable fiber connectivity in Enterprise and
Government networks around the world.
The FlexPoint 100FF is a single-mode to multimode
■
protocol-independent fiber converter
Plug-and-play installation requires no manual
■
configuration
Operates with a constant rate signal from 1M to
■
100Mbps
Supports auto-negotiation of duplex mode
■
Extends network distances up to 120km
■
Supports most network interfaces with a wide variety of
■
cable and connector types
Labeled status LEDs for quick and easy installation
■
Wall-mount or rack-mount on a 5-Module shelf or in
■
a 14-Module power-redundant FlexPoint Powered
Chassis
Completely software independent with no installation of
■
drivers required
Peace-of-mind reliability backed by a lifetime warranty
■
and free 24/7 technical support
Key Features