Sony DPT-S1 Manual

59

that you use safe security methods (WPA/WPA2-

PSK, etc.) and avoid non secure or WEP access.

Case A

Connecting to a Wi-Fi router with a WPS button 

Case B

Connecting to a Wi-Fi router with WPS PIN input 

Case C

Connecting to a Wi-Fi router by selecting a network 

name (page 60)

Case D

Connecting to a public Wi-Fi network (page 60)

Other than case A to D (Manual setup)

Set up a Wi-Fi network connection manually when 

connecting to an access point for which the SSID is 

hidden (page 61).

The Digital Paper device is compatible with WPS (Wi-
Fi Protected Setup), which lets you easily make a Wi-

Fi connection using the “WPS” button on your WPS-

compatible Wi-Fi router.

Turn on [Wi-Fi] on the device (page 58).

Tap [Wi-Fi Settings].

Tap [WPS Push-Button Configuration] 

 [Start].

On your Wi-Fi router, press the “WPS”* button 
within 2 minutes.

The device automatically attempts to establish a 

Wi-Fi connection.

* The name of the button on your Wi-Fi router may 

vary.

 “WPS” button

After the setup completion screen appears, tap 

[OK].

You can check the Wi-Fi connection status by the 

Wi-Fi icon on the status bar (page 58).

For details on Wi-Fi settings, see page 63.

If your WPS-compatible Wi-Fi router does not support 

push-button configuration, connect by using a PIN 

(Personal Identification Number).

Turn on [Wi-Fi] on the device (page 58).

Tap [Wi-Fi Settings].

Tap [Add Wi-Fi Network] 

 [WPS PIN Method]  

[Start].

A PIN code will be shown on the screen of the 

device.

Enter the PIN code into your Wi-Fi router.

Refer to your Wi-Fi router’s instruction manual for 

details.

Tap [OK] on the screen of the device.