Sony DPT-S1 Manual
9
Note
Charge the device within the recommended
temperature range of 5 °C to 35 °C (41 °F to 95 °F).
If the room is too hot or cold, disconnect the USB
If the room is too hot or cold, disconnect the USB
cable from the device, adjust room temperature
accordingly, then reconnect the USB cable to charge
the device.
the device.
Tip
It takes approximately 2.5 hours to fully charge the
It takes approximately 2.5 hours to fully charge the
device when the battery is drained.
Charging via your computer
1
Power on your computer.
2
Connect the Digital Paper device to your
computer with the supplied USB cable.
The icon turns into
and the Charge indicator
will light up red while charging. When charging is
complete, the icon turns into
and the
indicator turns off.
Note
When connected to a computer and with [Screen
Transfer] set to off (page 74), the device will be in
transfer mode. It will continue to charge but cannot
transfer mode. It will continue to charge but cannot
be operated.
3
When charging is complete, disconnect the USB
cable from the device and your computer.
cable from the device and your computer.
Note
Your computer must be turned on to charge the
Digital Paper device.
The device will not be charged if your computer
enters sleep mode, standby mode or hibernation.
enters sleep mode, standby mode or hibernation.
Keep your computer turned on with a stable and
continuous power supply while charging the
device.
device.
The (Power) button cannot be used when the
device is connected to your computer.
Tip
It takes approximately 3.5 hours to fully charge the
It takes approximately 3.5 hours to fully charge the
device when the battery is drained.
The device will be charged through the computer
when using the [Screen Transfer] function.
Even if a dedicated application for the [Screen
Transfer] function is not launched on your
computer, the device will keep charging if [Screen
computer, the device will keep charging if [Screen
Transfer] is on, and you can operate the device
while it is charging.
Charge/Battery status icon
The charge/battery status icon shows the charging
status or remaining battery level.
Number
Description
Four bars in the battery icon indicate a fully
charged or almost-fully charged battery.
The number of bars decreases with battery
consumption. Zero bars indicate that the
battery has almost no remaining charge.
The battery is fully charged.
The battery is charging.