Sony VGF-HS1 Manual

VGF-HS1   3-98-360-11(1)

Problem

Causes/measures

The INFO indicator light is 
blue.

  An important message has been downloaded to your Home Server. 

Check the Basic Information page on the Home Server Settings Page 
for the message.

The INFO indicator light is 
red.

  An error has occurred on your Home Server. Check the Basic 

Information page on the Home Server Settings Page for the error 
description.

The INFO indicator light is 
blinking in red.

  An error has occurred while file transfer by the One Touch Copy 

function is in progress, the Wireless Digital Audio is connected, or 
device registration for one of the Remote Home Access functions is in 
progress. Press the CANCEL button.

The (POWER) indicator 
light is blinking in orange.

  Your Home Server is in the process of turning on or off. If the indicator 

light stays blinking for 10 minutes or longer, unplug the power cord to 
shut down the power supply. Then plug the cord back in and turn on 
the Home Server.

The  (POWER) indicator 
light is blinking alternately in 
orange and green.

  The firmware update is in progress. If the indicator light stays blinking 

for 10 minutes or longer, unplug the power cord to shut down the power 
supply. Then plug the cord back in and turn on the Home Server.

Problem

Causes/measures

You are notified that the 

selected Home Server already 

has 5 registered devices and 

cannot register your device.

  You can register up to 5 devices for Back Up uploading on a single 

Home Server. Go to the Back Up page on the Home Server Settings 
Page and delete unnecessary profiles.

You are notified that the folder 

where you attempted to create 

the Send folder for a Data Sync 

transmission already includes 

the Receive folder for a Data 

Sync reception and cannot 

create a new Data Sync 

(transmitting) profile.

  The folder that you specified as the source folder for a Data Sync 

transmission has already been specified as the destination folder for a 
Data Sync reception. Specify the folder that has not been specified as 
the destination folder for any Data Sync reception.

You are notified that the folder 

where you attempted to create 

the Receive folder for a Data 

Sync reception already 

includes the Send folder for a 

Data Sync transmission and 

cannot create a new Data Sync 

(receiving) profile.

 You cannot specify the folder that includes the source folder for a 

backup upload or a Data Sync transmission as the destination folder 
for a Data Sync reception. Specify the folder that does not include the 
source folder for a backup upload or a Data Sync transmission.