Sony DSLR-A700 Manual

Page of 179
158
Warning messages
If the following messages appear, follow 
the instructions.
For “InfoLITHIUM” battery only
An incompatible battery pack is being 
used.
Battery exhausted
The battery pack is discharged. Charge 
the battery pack.
Set date and time?
Set the date and time. If the message 
appears frequently, the internal backup 
battery is used up. Replace the battery 
(pages 156, 169).
Power insufficient
You tried to perform [Cleaning mode] 
when the battery level is insufficient. 
Charge the battery pack or use the AC 
Adaptor/charger (not supplied).
No Memory Stick
No CF card
The type of the memory card inserted 
into the camera is different from the 
memory card type selected with 
[Memory card] in the 
 Setup menu. 
Set it to appropriate position.
Unable to use Memory Stick. 
Format?
Unable to use CF card. Format?
The memory card was formatted on a 
computer and the file format was 
modified, or the memory card was 
formatted on another device.
Select [OK], then format the memory 
card. You can use the memory card 
again, however, all previous data in the 
memory card is erased. It may take a 
some time to complete the format.
If the message still appears, change the 
memory card.
Card error
An incompatible memory card is 
inserted or the format was failed.
Read only memory
Your camera cannot record or delete 
images on this “Memory Stick Duo”.
Reinsert the Memory Stick.
Reinsert the CF card.
The inserted memory card cannot be 
used in your camera.
The memory card is damaged.
The terminal section of the memory 
card is dirty.
Use Memory Stick slot to format.
You attempt to format the “Memory 
Stick Duo” that is inserted into the CF 
card insertion slot using an adaptor. 
Insert the “Memory Stick Duo” into the 
“Memory Stick Duo” insertion slot and 
format it.
Processing...
When Long exposure noise reduction 
will be done for the same amount of 
time that the shutter was open. You 
cannot do any further shooting during 
this reduction.
No Memory Stick inserted. Shutter is 
locked.
No CF card inserted. Shutter is 
locked.
[Release w/oCard] is set to [Disable]. 
Set it to [Enable] or insert a memory 
card.