Sony DAV-HDX576WF Manual

masterpage:Right

specdef v20071207

filename[E:\SS2008\Models\DCR2WC-2W-4WF\3283032111\3283032111_DAV-HDX277WC-
279W-576WF\gb04gst.fm]

 model name [DAV-HDX277WC / HDX279W / HDX576WF]

 [3-283-032-11(1)]

Set up the calibration mic at the ear level 
using a tripod, etc. (not supplied). The front 
of each speaker should face the calibration 
mic, and there should be no obstruction 
between the speakers and the calibration 
mic.

C/c to select [YES].

• Make sure that the headphones are not 

connected to the unit or surround amplifier. You 

cannot operate following Steps with the 
headphones connected.

[AUTO CALIBRATION] starts.
Be quiet during the measurement.

• Loud test sound is output when [AUTO 

CALIBRATION] starts. You cannot turn the 
volume down. Give consideration to children 
and neighbors.

• Before [AUTO CALIBRATION], install the 

surround amplifier in the appropriate location. If 
you install the surround amplifier in an improper 
location, such as another room, proper 
measurement will not be obtained.

• Avoid being in the measurement area and 

making noise during the measurement (which 
takes about 3 minutes), as it may interfere with 
measurement.

C/

c to select [YES].

• The environment of the room in which the 

system is installed may affect measurements.

• If measurement fails, follow the message then 

retry [AUTO CALIBRATION].

Quick Setup is finished. All connections 
and setup operations are complete.

Press 

 DISPLAY in any Step.

• If you change the position of the speakers, reset the 

speaker settings. See “Getting Optimal Surround 
Sound for a Room” (page 89) and “Calibrating the 
Appropriate Settings Automatically” (page 90).

• If you want to change any of the settings, see “Using 

The Control Menu display appears on the 
TV screen.

SPEAKER FORMATION

STANDARD

AUDIO IN / A.C

AL MIC

Calibration mic

E.g., DAV-HDX576WF