Sony HCD-HDX500 Manual
Ad
v
v
a
nce
d
Se
ttings
an
d Adju
stme
nts
masterpage:Right
specdef v20061206
filename[E:\SS2007\Models\DC5\2895962131\2895962131DAVHDX500-501W\gb11adv.fm]
model name [DAV-HDX500/HDX501W]
[2-895-962-13(1)]
91
US
Note
• This function is available only when you set [HDMI
CONTROL] to [ON].
x [PAUSE MODE] (DVD VIDEO/DVD-R/
DVD-RW only)
DVD-RW only)
Selects the picture in pause mode.
x [TRACK SELECTION] (DVD VIDEO only)
Gives the sound track which contains the highest
number of channels priority when you play a
DVD VIDEO on which multiple audio formats
(PCM, DTS, MPEG audio, or Dolby Digital
format) are recorded.
number of channels priority when you play a
DVD VIDEO on which multiple audio formats
(PCM, DTS, MPEG audio, or Dolby Digital
format) are recorded.
Note
• When you set the item to [AUTO], the language may
change. The [TRACK SELECTION] setting has
higher priority than the [AUDIO] settings in
[LANGUAGE SETUP] (page 88). (Depending on
the disc, this function may not work.)
higher priority than the [AUDIO] settings in
[LANGUAGE SETUP] (page 88). (Depending on
the disc, this function may not work.)
• If PCM, DTS, Dolby Digital sound, and MPEG audio
tracks have the same number of channels, the system
selects PCM, DTS, Dolby Digital sound, and MPEG
audio tracks in this order.
selects PCM, DTS, Dolby Digital sound, and MPEG
audio tracks in this order.
x [MULTI-DISC RESUME] (DVD VIDEO/
VIDEO CD only)
VIDEO CD only)
Switches the Multi-disc Resume setting on or
off.
off.
x [AUDIO DRC] (DVD VIDEO only)
Narrows the dynamic range of the sound track.
Useful for watching movies at low volume late
at night.
Useful for watching movies at low volume late
at night.
x [AUDIO (HDMI)]
Selects the audio output status from the HDMI
OUT jack.
OUT jack.
Note
• When you connect the unit and TV with the HDMI
cord and [ON] is selected, AUDIO DRC, A/V SYNC,
DYNAMIC BASS, MOVIE/MUSIC, and sound field
are not applied to the sound that is output from the
TV.
DYNAMIC BASS, MOVIE/MUSIC, and sound field
are not applied to the sound that is output from the
TV.
[ON]
Sets the STB SYNCHRO function
to on.
to on.
[AUTO]
The picture, including subjects
that move dynamically, is output
with no jitter. Normally select this
position.
that move dynamically, is output
with no jitter. Normally select this
position.
[FRAME]
The picture, including subjects
that do not move dynamically, is
output in high resolution.
that do not move dynamically, is
output in high resolution.
[OFF]
No priority given.
[AUTO]
Priority given.
[ON]
Stores the resume settings in
memory for up to 40 discs.
memory for up to 40 discs.
[OFF]
Does not store the resume settings
in memory. Playback restarts at
the resume point only for the
current disc in the unit.
in memory. Playback restarts at
the resume point only for the
current disc in the unit.
[OFF]
No compression of dynamic
range.
range.
[STANDARD]
Reproduces the sound track with
the kind of dynamic range that the
recording engineer intended.
the kind of dynamic range that the
recording engineer intended.
[MAX]
Compresses dynamic range fully.
[OFF]
The sound is not output from the
HDMI OUT jack.
HDMI OUT jack.
[ON]
Outputs audio signals by
converting Dolby Digital, DTS, or
96 kHz/24 bit PCM signals to 48
kHz/ 16 bit PCM.
converting Dolby Digital, DTS, or
96 kHz/24 bit PCM signals to 48
kHz/ 16 bit PCM.