Sony ht-v3000dp Manual
58
Recording TV programs using the VCR Plus+
®
system (SLV-D560P only)
To stop recording
To stop the VCR while recording, press x STOP.
To use the DVD-VCR after setting the timer
To use the DVD-VCR before a timer recording begins, just press ?/1. The timer
indicator disappears from the display window and the DVD-VCR switches on.
Remember to press ?/1 to reset the VCR to the timer recording standby mode after
using the VCR.
indicator disappears from the display window and the DVD-VCR switches on.
Remember to press ?/1 to reset the VCR to the timer recording standby mode after
using the VCR.
You can also do the following tasks while the VCR is recording:
• Reset the counter (page 44).
• Display tape information on the TV screen (page 46).
• Check the timer settings (page 59).
• Watch another TV program (page 47).
• Display tape information on the TV screen (page 46).
• Check the timer settings (page 59).
• Watch another TV program (page 47).
Tip
• To check, change or cancel the program setting, see “Checking/changing/canceling timer
• To check, change or cancel the program setting, see “Checking/changing/canceling timer
Notes
• If the VCR does not accept the PlusCode number, this means that:
• If the VCR does not accept the PlusCode number, this means that:
– The PlusCode number is incorrect.
– “Once,” “Daily,” “Mo~Sa,” “Mo~Fr” or “Weekly” was selected incorrectly. You cannot
– “Once,” “Daily,” “Mo~Sa,” “Mo~Fr” or “Weekly” was selected incorrectly. You cannot
select “Daily,” “Mo~Sa,” “Mo~Fr” or “Weekly” for a program that airs more than seven
days ahead.
days ahead.
Correctly set the PlusCode number again from step 2.
• When the PlusCode number is incorrect, “Invalid code” will appear in the display.