Sony IPT-DS1 Manual

7-GB

Preparing the unit

Inserting batteries

You can use the following batteries.

Two LR6 (size AA) alkaline batteries

Two AA Nickel-Metal Hydride batteries

1 Turn this unit off by sliding the ON/OFF

(power) switch to OFF.

2 Open the battery cover.

Note

Be careful not to pull or exert a force on the foot of

this unit when opening the battery cover. Doing so

can cause a malfunction.

3 Insert the batteries into the battery

compartment according to the marks

inside the compartment.

4 Close the battery cover.

Notes

The batteries inserted in this unit only power this

unit. They cannot power or charge the camera.

Be careful not to touch the multi connector when

holding this unit.

You cannot use manganese batteries.

Always use the same kind of batteries together.

Check the polarities of the batteries when inserting

them into this unit. If you insert the batteries in the

wrong direction, this unit does not work.

Do not use a new or charged battery together with

a dead battery.

To remove batteries

Turn this unit off and then remove the batteries.

Note

When removing the batteries, be careful they do

not fall and cause injury.

Tip

Remove the batteries if this unit will not be used

for a long period of time.

Battery level

If the battery level is low, the operation/battery

indicator flashes slowly. If the battery level gets

lower, indicator flashes more rapidly and this unit

automatically enters standby mode.