Sony IPT-DS1 Manual

Page of 215
13-GB
Attaching the dedicated 
stand
1  Insert the legs of the dedicated stand 
firmly into the mount.
2  To set this unit on the dedicated stand, 
align the projections on the mount of 
the dedicated stand with the tripod 
receptacle of this unit.
Notes
 
¦
Attach the camera to this unit before setting the 
 
ˎ
unit on the dedicated stand.
Use the dedicated stand in a level place.
 
ˎ
Do not apply a strong force to the dedicated stand.
 
ˎ
Pressing the button too strongly may cause this 
 
ˎ
unit to fall off the dedicated stand.
Hold the camera when operating it to prevent it 
 
ˎ
from falling and causing injury.
Keep this unit away from people’s faces, especially 
 
ˎ
children’s faces¸ to prevent injury in case it falls.
To use a commercially available tripod
You can use a commercially available tripod instead 
of the dedicated stand. However, some tripods 
cannot be used depending on the shape of the 
camera platform.
Notes
 
¦
Do not use force to tighten the tripod screw.
 
ˎ
When this unit is attached to a tripod, do not lift 
 
ˎ
the unit or swing the tripod around.
Be careful not to pull or exert a force on the foot of 
 
ˎ
this unit. Doing so can cause a malfunction.