Sony MHS-TS20 Manual

Ta
bl

4 When charging is finished, delete the USB connection between the

camera and computer.

• Install Bloggie Software (pre-loaded on the internal memory) after completing the procedure above.

• While the camera is connected to a computer, you cannot operate the camera. Be sure to disconnect the

camera before operation.

• Do not apply force to the camera, when you connect the camera to a computer. This may cause damage to

the camera or the computer.

• When you connect the camera to a notebook computer that is not connected to an AC power source, the

battery of the notebook computer may be depleted rapidly. Do not leave the camera connected to the
computer for a long time.

• Charging the battery or the connection with customized or hand-built computers is not guaranteed.

Depending on the type of USB device used, charging may not function properly.

• If you do not intend to use the camera for an extended period, charge the camera once every 6 to 12

months to maintain battery performance.

Perform the procedures from step 1 to 3 below before:

• Disconnecting the USB connection support cable.
• Turning off the camera.

1 Double-click the disconnect icon on the

tasktray.

2 Click (USB Mass Storage Device) t [Stop].
3 Confirm the device on the confirmation

window, then click [OK].

• Drag and drop the drive icon to the “Trash” icon beforehand when you use a Macintosh computer, and

the camera is disconnected from the computer.

Notes

Deleting the USB connection

Note

Windows Vista

Disconnect icon

Windows XP

To retract the USB jack

Push the USB jack back in the direction
of the arrow until it clicks.

Continued