Sony DSC-P51 Manual

Page of 108
83
Tr
oubl
e
s
hoo
ting
Shooting Still images/Movies
Symptom
Cause
Solution
The LCD screen does not 
light when the power is 
turned on.
• The power was turned off with the LCD screen 
set to [OFF] the last time the camera was used. 
p Turn the LCD screen [ON] (page 32).
The subject is not visible 
on the LCD screen.
• The mode dial is not set to 
 or SCN, or 
.
p Set it to 
 or SCN, or 
 (pages 26, 74).
The image is out of focus.
• The subject is too close. 
• Scene selection is set to the Landscape mode.
• You have selected Focus Preset.
• Center AF is selected.
p Set the macro recording mode (DSC-P71 only) when you shoot 
a subject that is within 50 cm (19 
11
/
16
 inches) from the lens. 
Make sure to place the lens farther away from the subject than 
the shortest shooting distance when shooting  (page 28)
p Cancel the setting (page 34)
p Choose a focus method (page 58).
p Use either the Multipoint AF (page 58) or Center AF to shoot 
with AF lock (page 59).
Unable to zoom.
• You cannot zoom while shooting a movie 
(MPEG MOVIE) (DSC-P71/P31 only).
Digital zoom does not 
function.
• You cannot  zoom while shooting a movie 
(MPEG MOVIE). 
• [DIGITAL ZOOM] is set to [OFF] in SET UP 
(DSC-P71/P51 only).
• The LCD screen is OFF.
p Change it to [ON] (pages 55, 97).
p Turn it ON (page 32).
The image is too dark.
• You are shooting a subject with a light source 
behind the subject.
• The brightness of the LCD screen is too low. 
• The POWER SAVE is set to ON.
p Adjust the exposure (page 56).
p Adjust the brightness of the LCD screen in the SET UP settings 
(pages 55, 98).
p Turn the POWER SAVE to OFF (page 16).
The image is too bright. 
• You are shooting under a spotlight in a dark 
location, like stage lighting. 
• The LCD is too bright. 
p Adjust the exposure (page 56)
p Adjust the [LCD BACKLIGHT] in the SET UP settings (pages 
The image is 
monochrome (black and 
white).
• [P. EFFECT] is set to [B&W] mode. 
p Cancel [B&W] mode (page 60).