Sony MVC-CD400 Manual
model name1[MVC-CD400/CD250]
[3-075-356-12(1)]
30
filename[C:\MVC-CD400Nouhinn\3075356121\307535612MVCCD400U2\04bas.fm]
masterpage:Left1:2
•
If the menu is currently displayed, press MENU
first so that the menu disappears.
first so that the menu disappears.
•
•
When using the Auto or
(Forced flash)
mode, you may notice some noise in the
image when you look at the LCD screen in a
dark place, but this will have no effect on the
shot image.
image when you look at the LCD screen in a
dark place, but this will have no effect on the
shot image.
•
While charging the flash, the /CHG lamp
flashes. After the charging is complete, the
lamp goes out.
flashes. After the charging is complete, the
lamp goes out.
•
When you press the shutter button halfway
down while the flash is strobing, the /CHG
lamp turns on.
down while the flash is strobing, the /CHG
lamp turns on.
•
Attaching a conversion lens (not supplied) may
block the light from the built-in flash or cause
the lens shadow to appear.
block the light from the built-in flash or cause
the lens shadow to appear.
•
You cannot use an external flash that supports
hot shoe (not supplied) and the built-in flash at
the same time.
hot shoe (not supplied) and the built-in flash at
the same time.
•
When using a commercially available external
flash, set [HOT SHOE] to [ON] in the SET UP
settings (MVC-CD400 only).
flash, set [HOT SHOE] to [ON] in the SET UP
settings (MVC-CD400 only).
•
Two types of external flash can be used: the
optional HVL-F1000 flash and commercially
available flashes that support hot shoe
(page 84).
optional HVL-F1000 flash and commercially
available flashes that support hot shoe
(page 84).
•
You cannot use the external flash HVL-F1000
(optional) and the built-in flash at the same
time.
(optional) and the built-in flash at the same
time.
To reduce the red-eye
phenomenon when
shooting live subjects
phenomenon when
shooting live subjects
Set [RED EYE REDUCTION] to [ON]
in the SET UP settings (page 116).
in the SET UP settings (page 116).
indicator appears on the LCD screen,
and the flash pre-strobes before
shooting to reduce the red-eye
phenomenon.
and the flash pre-strobes before
shooting to reduce the red-eye
phenomenon.
•
Red-eye reduction may not produce the
desired effects depending on individual
differences, the distance to the subject, if
the subject does not see the pre-strobe, or
other conditions.
desired effects depending on individual
differences, the distance to the subject, if
the subject does not see the pre-strobe, or
other conditions.
m