KitchenAid 27" Combination Wall Oven with Even-Heat™ True Convection (lower oven) Use & Care Manual

Page of 48
11
Microwave Oven Cancel
The Cancel keypad stops any microwave oven function except 
for the Clock, Timer, and Control Lock.
The oven will also turn off when the door is opened. When the 
door is opened, the element(s) and fan will turn off, but the oven 
light will remain on. Close the door and touch START to resume 
the preset cycle.
The oven cooling fan may continue to operate even after an 
oven function has been canceled or completed, depending on 
the oven temperature.
Clock
This is a 12-hour clock. Before setting, make sure the oven, 
Timer, and Timed Cooking are off.
To Set:
1.  Touch CLOCK/TOOLS.
2.  Touch the number “1” keypad.
3.  Touch the number keypads to set the time of day.
4.  Touch CLOCK/TOOLS or START.
Tones
Tones are audible signals, indicating the following:
One beep
 Valid keypad touch
 Function has been entered
One chime
 Preheat cycle has been completed
Three beeps
 Invalid keypad touch
Three chimes
 End of a cooking cycle
Four chimes
 When timer reaches zero  
Includes using the Kitchen Timer for functions other than 
cooking.
Tone Volume
The volume is preset at low, but can be changed to high.
To Change: Touch CLOCK/TOOLS and then “4” to toggle 
volume between high and low settings.
All Tones
All tones are preset on, but can be turned off.
To Turn Off/On: Touch CLOCK/TOOLS and then “3” to toggle 
tones between On and Off settings.
NOTE: The Kitchen Timer is not affected by reminder tones.
End-of-Cycle and Reminder Tones
The Timed Cooking end-of-cycle and reminder tones are preset 
on, but can be turned off. If all tones have been turned off, the 
end-of- cycle and reminder tones cannot be independently 
turned on.
To Turn Tones Off/On: Touch CLOCK/TOOLS and then “5” to 
toggle tones between On and Off settings.
NOTE: The Kitchen Timer is not affected by these reminder 
tones.
Tools (Microwave Oven Models)
The Tools selection keypad allows access to some hidden 
functions within the Electronic Oven Control.
To Use:
1.  
 Touch CLOCK/TOOLS. The oven display will scroll through 
the various options.
You can also touch the Clock/Tools keypad repeatedly to 
manually scroll through the list of options.
2.   Touch the number keypad for the specific option to toggle 
the function setup. Use the following chart as a guide.
TOOLS CHART
TOOLS
MICROWAVE ONLY
COMBO
1
Clock
Clock
2
Temp
Temp
3
Sound (On/Off)
Sound (On/Off)
4
Sound (High/Low)
Sound (High/Low)
5
End Tone
End Tone
6
Turntable
Calibrate
7
Language
Sabbath
8
Demo Mode
Turntable
9
Language
0
Demo Mode
Fahrenheit and Celsius
The temperature is preset in Fahrenheit; however it can be 
changed to Celsius. 
To Change: Touch CLOCK/TOOLS and then “2” to toggle 
temperature between Fahrenheit and Celsius settings.
When the temperature is in Fahrenheit, “°F” follows the oven 
temperature.
When the temperature is in Celsius, “°C” follows the oven 
temperature.
Timer
The Timer can be set in minutes and seconds or hours and 
minutes and counts down the set time.
NOTE: The Timer does not start or stop the oven.