KitchenAid 13-Cup Food Processor with ExactSlice™ System Use & Care Manual

With the work bowl installed, place the 

drive adapter on the power shaft of the 

base. 

 

 

Holding the adjustable slicing disc by  

the 2 finger grips, align the pins on the 

adjustable slicing disc adapter with the 

L-slots on the disc. Slide the disc down 

onto the adapter and turn to engage 

the pins in the L-slot.

IMPORTaNT: The adjustable slicing disc can only be installed in one direction.

Place the work bowl cover on the work 

bowl with the feed tube just to the left 

of the work bowl handle. Grasp the feed 

tube and turn the cover to the right until  

it locks into place.

Fit the food pusher into the 3-in-1  

feed tube. See “Using the 3-in-1 Feed 

Tube” for details on working with  

different sized foods. 

NOTE: Be sure to install the desired accessory before attaching the work bowl cover.

NOTE: Your Food Processor will not  

operate unless the work bowl and work 

bowl cover are properly locked on the 

base, and the large pusher is inserted to 

the maximum fill line on the feed tube 

(approximately halfway down).