KitchenAid 24" Stainless Steel Beverage Center with SatinGlide® Metal-Front Racks Dimensional Illustrations

KUBL204E KUBL304E
KUBR204E KUBR304E

Electrical: A 115 volt, 60 Hz., AC only, 
15- or 20-amp fused, grounded electrical 
supply is required. It is recommended that 
a separate circuit serving only your 
beverage center be provided. Use an 
outlet that cannot be turned off by a 
switch. Do not use an extension cord.
NOTE: Before performing any type of 
installation, cleaning, or removing a light 
bulb, unplug beverage center or  
disconnect power.

A

B

Model

Door Swing

KUBL204E
KUBL304E

Left

KUBR204E
KUBR304E

Right

A. 14³⁄₄" (37.5 cm) utility opening

To ensure proper ventilation for your beverage center, allow for a ¹\₄" (6.35 mm) space on each 

side and at the top. When installing your beverage center next to a fixed wall, leave 2¹\₂" (6.35 cm) 

minimum clearance on the hinge side to allow for the door to swing open.
NOTE: It is recommended that you do not install the beverage center near an oven, radiator, or 

other heat source. Do not install in a location where the temperature will fall below 55°F (13°C). 

For best performance, do not install the beverage center behind a cabinet door or block the base 

grille.

 

■

Height dimensions are shown with the leveling legs extended to the minimum height.

NOTE: When leveling legs are fully extended, add B\," (15 mm) to the height dimensions.

 

■

If the floor of the opening is not level with the kitchen floor, shim the opening to make it level with the 

kitchen floor.

Because Whirlpool Corporation policy includes a continuous commitment to improve 
our products, we reserve the right to change materials and specifications without notice.

Dimensions are for planning purposes only. For complete details, see Installation 
Instructions packed with product. Specifications subject to change without notice.

Ref. W10741571A 

2/15