KitchenAid KDRS483VSS Installation Guide

Reinstall Kick Plate

1.  Align shoulder screw mounting holes with shoulder screws 

on range.

2.  Push kick plate down against front of range until the top 

screw holes are aligned with the mounting holes on the front 

of the range.

3.  Reattach screws to the top of the kick plate.

Complete Installation

1.  Check that all parts are now installed. If there is an extra part, 

go back through the steps to see which step was skipped.

2.  Check that you have all of your tools.
3.  Dispose of/recycle all packaging materials.
4.  For oven use and cleaning, read the Use and Care Guide.

1.  Turn power ON.
2.  Start a Bake cycle. See the Use and Care Guide for 

operating instructions.
If oven(s) does not operate, check the following:

 

■

Household fuse is intact and tight or circuit breaker 

has not tripped.

 

■

Electrical supply is connected.

 

■

See the “Troubleshooting” section in the Use 

and Care Guide.

3.  When oven has been on for 10 to 15 minutes, open the oven 

door and feel for heat.
If you do not feel heat or if an error code (“F” followed by 

a number plus “E” followed by a number) appears in the 

display, turn off the oven and contact a qualified technician.

4.  Touch OFF.
To set the clock and other oven functions, refer to the Use 

and Care Guide.
If you need Assistance or Service:
Please reference the “Assistance or Service” section of the 

Use and Care Guide or contact the dealer from whom you 

purchased your range.