KitchenAid 15" Electric Cooktop with 2 Radiant Elements Installation Guide

IMPORTANT: Use the 3-wire cable from power supply where 
local codes permit connecting the frame-ground conductor to 
the neutral (white) junction box wire. 

1. Connect the 2 black wires together using the UL listed wire 

connectors.

2. Connect the 2 red wires together using the UL listed wire 

connectors.

3. Connect the green or bare cooktop cable wires to the white 

(neutral) wire in the junction box using the UL listed wire 
connectors.

4. Install junction box cover.

NOTE: This section applies only if you are using clamping 
brackets.

1. Place the 2½" (6.4 cm) clamping screws into the outermost 

hole in the clamping bracket.

2. Check that the cooktop is still level.

3. Use a screwdriver to tighten the screws against the 

countertop. Do not overtighten.

1. Check that all parts are now installed. If there is an extra part, 

go back through the steps to see which step was skipped.

2. Check that you have all your tools.

3. Dispose of/recycle all packaging materials.

4. Use a mild solution of liquid household cleaner and warm 

water to clean cooktop before use. Dry thoroughly with a soft 
cloth. For more information, see the “Cooktop Care” section 
of the Use and Care Guide.

5. Read “Cooktop Use” in the cooktop Use and Care Guide.

6. Reconnect power.

NOTE: If the cooktop does not work after turning on the power, 
check that a circuit breaker has not tripped or a household fuse 
has not blown. See “Troubleshooting” section in the Use and 
Care Guide for further information.

Please reference the “Assistance or Service” section of the Use 
and Care Guide or contact the dealer from whom you purchased 
your cooktop.

G

A

B

C

D

E

F

H

A

B

C

D

E

F

G