KitchenAid Bottom-Mount Refrigerator Dimensional Illustrations
Bottom Mount Refrigerator
PRODUCT MODEL NUMBERS
PRODUCT DIMENSIONS
LOCATION REQUIREMENTS
KBLS20EV
KBLS22EV
KBLS22KV
KBLS22EV
KBLS22KV
KBRS20EV
KBRS22EV
KBRS22KV
KBRS22EV
KBRS22KV
Electrical: A 115-volt, 60-Hz, AC-only, 15- or
20-amp fused, grounded electrical supply is
required. It is recommended that a separate circuit
serving only your refrigerator be provided. Use an
outlet that cannot be turned off by a switch. Do not
use an extension cord.
20-amp fused, grounded electrical supply is
required. It is recommended that a separate circuit
serving only your refrigerator be provided. Use an
outlet that cannot be turned off by a switch. Do not
use an extension cord.
Water: Connect the ice maker to a cold water line
with water pressure between 35 and 100 psi
(241 and 689 kPa).
with water pressure between 35 and 100 psi
(241 and 689 kPa).
IMPORTANT: The pressure of the water coming
out of a reverse osmosis system going to the
water inlet valve of the refrigerator needs to be
between 35 and 120 psi (241 and 827 kPa).
out of a reverse osmosis system going to the
water inlet valve of the refrigerator needs to be
between 35 and 120 psi (241 and 827 kPa).
If a reverse osmosis water filtration system is
connected to your cold water supply, the water
pressure to the system needs to be a minimum of
40 to 60 psi (276 to 414 kPa).
connected to your cold water supply, the water
pressure to the system needs to be a minimum of
40 to 60 psi (276 to 414 kPa).
Because Whirlpool Corporation policy includes a continuous commitment to improve
our products, we reserve the right to change materials and specifications without notice.
our products, we reserve the right to change materials and specifications without notice.
Dimensions are for planning purposes only. For complete details, see Installation
Instructions packed with product. Specifications subject to change without notice.
Instructions packed with product. Specifications subject to change without notice.
Ref. W10137649
03-12-09
2
¹⁄
2
" (6.3 cm)
¹⁄₂
" (1.25 cm)
4
1
D
overall
C
top of
cabinet
E
not incl.
handle
A
To ensure proper ventilation for your refrigerator, allow for 1 ⁄ 2 " (1.25 cm) space on
each side, at the top and behind the refrigerator. When installing your refrigerator
next to a fixed wall, leave 2-1/2" (6.3 cm) minimum on each side (depending on
your model) to allow for the door to swing open. If your refrigerator has an ice
maker, allow extra space at the back for the water line connections.
each side, at the top and behind the refrigerator. When installing your refrigerator
next to a fixed wall, leave 2-1/2" (6.3 cm) minimum on each side (depending on
your model) to allow for the door to swing open. If your refrigerator has an ice
maker, allow extra space at the back for the water line connections.
NOTE: Do not install the refrigerator near an oven, radiator, or other heat source, nor
in a location where the temperature will fall below 55°F (13°C).
in a location where the temperature will fall below 55°F (13°C).
®
incl.
handle
B
Depth (Excl.
Depth (Incl.
Cabinet
Overall
Cabinet
handles)
handles)
Height
Height
Width
Model #
“A”
“B”
“C”
“D”
“E”
KBLS20EV
26-7/8"
29-3/8"
68-1/2"
69-15/16"
35-5/8"
(68.3 cm)
(74.6 cm)
(174 cm)
(177.6 cm)
(90.5 cm)
KBLS22EV
30-7/8"
33-3/8"
68-1/2"
69-15/16"
32-5/8"
(78.4 cm)
(84.8 cm)
(174 cm)
(177.6 cm)
(82.9 cm)
KBLS22KV
30-7/8"
33-3/8"
68-1/2"
69-15/16"
32-5/8"
(78.4 cm)
(84.8 cm)
(174 cm)
(177.6 cm)
(82.9 cm)
KBRS20EV
26-7/8"
29-3/8"
68-1/2"
69-15/16"
35-5/8"
(68.3 cm)
(74.6 cm)
(174 cm)
(177.6cm)
(90.5 cm)
KBRS22EV
30-7/8"
33-3/8"
68-1/2"
69-15/16"
32-5/8"
(78.4 cm)
(84.8 cm)
(174 cm)
(177.6 cm)
(82.9 cm)
KBRS22KV
30-7/8"
33-3/8"
68-1/2"
69-15/16"
32-5/8"
(78.4 cm)
(84.8 cm)
(174 cm)
(177.6 cm)
(82.9 cm)