Canon PowerShot SX540 HS Manual

83

Choose from the three flash levels in [ ] mode.

 

●

Set the mode dial to [ ].

 

●

Raise the flash, press the [ ] button and 

immediately turn the [

] dial to choose 

the flash level, and then press the [ ] 

button.

 

●

Once the setting is complete, the flash 

output level is displayed.  

[

]: Minimum, [

]: Medium, [

]: 

Maximum

 

●

You can also set the flash level by accessing MENU (= 29) 
and choosing [

] tab > [Flash Settings] > [Flash Output].

 

●

You can set the flash level in [

] or [

] mode by accessing 

MENU (= 29) and choosing [

] tab > [Flash Settings] > 

[Flash Mode] > [Manual].

 

●

You can also access the [Flash Settings] MENU screen (= 29) 
when the flash is up by pressing the [ ] button and immediately 
pressing the [

] button.

 

●

After you set the shutter speed or aperture value, the exposure 
level may change if you adjust the zoom or recompose the shot.

 

●

Screen brightness may change depending on your specified 
shutter speed or aperture value. However, screen brightness 
remains the same when the flash is up and the mode is set to [ ].

 

●

To have the setting you did not configure in step 2 (whether 
shutter speed or aperture value) automatically adjusted to obtain 
standard exposure, hold the shutter button halfway, and then 
press the [ ] button (Note that standard exposure may not be 
possible with some settings.).

 

●

With shutter speeds of 1.3 seconds or slower, ISO speed is [ ] 
and cannot be changed.

 

●

[ ]: Manual

 

●

Calculation of standard exposure is based on the specified 
metering method (= 69).