ASUS 970 PRO GAMING/AURA User Manual

ASUS 970 PRO GAMING/AURA

2‑23

HD Azalia Configuration
Allows you to change the HD Azalia configuration.
[Disabled] 

Disables the device.

[Enabled] 

Enables the High Definition Audio Azalia device.

The following items appear only when you set HD Audio Azalia Device to [Enabled].

Azalia Front Panel [HD]
Allows you to set the Azalia front panel audio connector (AAFP) type to legacy AC’97 

or high‑definition audio depending on the audio standard that the front panel audio 

module supports.
[AC97] 

Sets the front panel audio connector (AAFP) mode to legacy AC’97

[HD] 

Sets the front panel audio connector (AAFP) mode to high definition 

audio.

SPDIF Out Type [SPDIF]
[SPDIF] 

Sets to [SPDIF] for SPDIF audio output.

[HDMI] 

Sets to [HDMI] for HDMI audio output.

Allows the BIOS to switch off some power at S5 to get the system ready for ErP requirement. 

When this item is set to [Enabled], all other PME options will be switched off.
Configuration options: [Disabled] [Enabled]

[Power Off] 

The system goes into off state after an AC power loss. 

[Power On] 

The system goes into on state after an AC power loss.

[Last State] 

The system goes into either off or on state, whatever the system state was 

before the AC power loss.

[Disabled] 

Disables the PME to wake up by PCI/PCIE devices.

[Enabled] 

Allows you to turn on the system through a PCI/PCIE LAN or modem card. 

This feature requires an ATX power supply that provides at least 1A on the 

+5VSB lead.

[Disabled] 

Disables Ring to generate a wake event.

[Enabled] 

Enables Ring to generate a wake event.