Manualsbrain.com
  1. Manuals
  2. Brands
  3. Netgear
  4. M5300-52G-POE+ (GSM7252PSv1h2) - ProSAFE 48+4 L2+ POE Stackable Managed Switch
  5. Software Guide

Netgear M5300-52G-POE+ (GSM7252PSv1h2) - ProSAFE 48+4 L2+ POE Stackable Managed Switch Software Guide

Download
Page of 764
OSPF and OSPFv3 
388
M6100, M5300, and M7100 Series Managed Switches 
If you select Enable, OSPF is activated for the switch. By default, OSPF is enabled. You 
must configure a router ID before OSPF can become operational. Use the IP 
Configuration screen to configure a router ID or issue the CLI command config router id. 
For more information, see 
325.
The Router ID displays the 32-bit integer in dotted-decimal format that uniquely identifies 
the router within the autonomous system (AS).
To change the router ID, you must first disable OSPF. After you set the new router ID, you 
must reenable OSPF for the change to take effect. The default value is 0.0.0.0, although 
this is not a valid router ID.
9. 
Click the Apply button.
The updated configuration is sent to the switch. Configuration changes take effect 
immediately.
Configure the OSPF Default Route Advertise Settings
To configure default route advertise settings:
1. 
Prepare your computer with a static IP address in the 169.254.100.0 subnet, for 
example, 169.254.100.201.
2. 
Connect an Ethernet cable from an Ethernet port on your computer to an Ethernet port on 
the switch.
3. 
Launch a web browser.
4. 
Enter the IP address of the switch in the web browser address field.
The default IP address of the switch is 169.254.100.100. 
The Login screen displays.
5. 
Enter the user name and password. 
The default admin user name is admin and the default admin password is blank, that is, 
do not enter a password.
6. 
Click the Login button. 
The web management interface menu displays.
7. 
Select Routing > OSPF > Advanced > OSPF Configuration.