Netgear M5300-52G-POE+ (GSM7252PSv1h2) - ProSAFE 48+4 L2+ POE Stackable Managed Switch Software Guide

Valid range of queue IDs is 0 to 7. 

 to specify the specific egress interface where the matching traffic stream is 

copied in addition to being forwarded normally by the device.

This field cannot be set if a redirect interface is already configured for the ACL rule. This 
field is visible for a Permit action. 

Use Redirect Interface to specify the specific egress interface where the matching traffic 

stream is forced, bypassing any forwarding decision normally performed by the device. 

This field cannot be set if a mirror interface is already configured for the ACL rule. 

Use Match Every to specify an indication to match every Layer 2 MAC packet. 

Valid values are as follows:

. Signifies that every packet is considered to match the selected ACL rule. 

. Signifies that it is not mandatory for every packet to match the selected ACL 

rule. 

Use CoS to specify the 802.1p user priority to compare against an Ethernet frame. 

Valid range of values is 0 to 7.

Use Destination MAC to specify the destination MAC address to compare against an 

Ethernet frame. Valid format is xx:xx:xx:xx:xx:xx. 

The BPDU keyword can be specified using a destination MAC address of 
01:80:C2:xx:xx:xx. 

Use Destination MAC Mask to specify the destination MAC address mask specifying which 

bits in the destination MAC to compare against an Ethernet frame. 

Valid format is xx:xx:xx:xx:xx:xx. The BPDU keyword can be specified using a destination 
MAC mask of 00:00:00:ff:ff:ff. 

Use EtherType Key to specify the EtherType value to compare against an Ethernet frame. 

Valid values are as follows:

Appletalk 

ARP 

IBM SNA 

IPv4 

IPv6 

IPX 

MPLS multicast 

MPLS unicast 

NetBIOS 

Novell 

PPPoE