Netgear M6100 – Campus Edge and SMB Core Chassis Switches User Guide

Informational(6) - informational messages

Debug(7) - debug-level messages

To access the Syslog Configuration page, click Monitoring 



.

Use Admin Status to enable/disable logging to configured syslog hosts. Setting this to 

disable stops logging to all syslog hosts. Disable means no messages will be sent to 

any collector/relay. Enable means messages will be sent to configured collector/relays 

using the values configured for each collector/relay. Enable/Disable the operation of the 

syslog function by selecting the corresponding radio button.

Use Local UDP Port to specify the port on the local host from which syslog messages are 

sent. The default port is 514. Specify the local port in the text field.

Messages Received 

The number of messages received by the log process. This includes 
messages that are dropped or ignored. 

Messages Relayed

The count of syslog messages relayed.

Messages Ignored

The count of syslog messages ignored.

Use IP Address Type to specify the Address Type of Host. It may be one of the following:

IPv4

IPv6

DNS

 - This is the address of the host configured for syslog. 

 - This is the port on the host to which syslog messages are sent. The default port is 

514. Specify the port in the text field.