Netgear M7100-24X (XSM7224) - ProSAFE 24 Ports 10G Fully Managed L2 Switch Data Sheet
Highlights
Layer 2+ with static routing
• The M7100 series comes with Port-based/
• The M7100 series comes with Port-based/
VLAN-based/Subnet-based “static routing”
Layer 2+ versions
Layer 2+ versions
• L3 fixed routes to the next hop towards
the destination network are added to the
routing table
routing table
• L3 routing is wire-speed in the M7100 series
hardware with up to 128 static routes (IPv4)
10 Gigabit transition with Base-T
• 10GBase-T, like other Base-T technologies,
• 10GBase-T, like other Base-T technologies,
uses the standard RJ45 Ethernet jack
• It is backward compatible, auto-negotiating
between higher and lower speeds – thereby
not forcing an all at once network
equipment upgrade
not forcing an all at once network
equipment upgrade
• Cat5/Cat5E are supported for Gigabit
speeds; when Cat6 twisted pair copper
cabling is a minimum requirement for 10
Gigabit up to 30 meters
cabling is a minimum requirement for 10
Gigabit up to 30 meters
• Cat6A or newer Cat7 cabling allow for up to
100 meter 10GBase-T connections
Top-of-the-line performance and IPv6 ready
• Two redundant, hot-swap power supplies
• Two redundant, hot-swap power supplies
(one PSU comes with the switch; second
optional PSU is ordered separately)
optional PSU is ordered separately)
• Two removable fan trays provide front-to-
back cooling airflow for best compatibility
with data center hot aisle/cold aisle airflow
patterns
with data center hot aisle/cold aisle airflow
patterns
• Multi-Chassis Link Aggregation (MLAG)
allows for active-active redundant server
connections across two switches, using LACP
connections across two switches, using LACP
Top-of-rack availability
• Two redundant, hot-swap power supplies
• Two redundant, hot-swap power supplies
(one PSU comes with the switch; second
optional PSU is ordered separately)
optional PSU is ordered separately)
• Two removable fan trays provide front-to-
back cooling airflow for best compatibility
with data center hot aisle/cold aisle airflow
patterns
with data center hot aisle/cold aisle airflow
patterns
Industry standard management
• Industry standard command line interface
• Industry standard command line interface
(CLI)
• Fully functional NETGEAR web interface
(GUI)
Industry leading warranty
• NETGEAR M7100 series is covered under
• NETGEAR M7100 series is covered under
NETGEAR ProSAFE Lifetime Hardware
Warranty*
Warranty*
• 90 days of Technical Support via phone and
email, Lifetime Technical Support through
online chat and Lifetime Next Business Day
hardware replacement
online chat and Lifetime Next Business Day
hardware replacement
Page 2
Models at a glance
Page 3
Product brief
Page 4-7
Modern access layer features highlights
Page 8-9
Target application
Page 10-11
Accessories & modules
Page 12-27
Technical specifications and Ordering information
ProSAFE® 10 Gigabit Managed Switches
Data Sheet
M7100 series
Page 1 of 27
The NETGEAR® 10 Gigabit M7100 series consists of a fully
managed, low-latency, line-rate 10G Copper “Base-T” switch
solution; 24 ports 10GBase-T (RJ45) that support Fast
Ethernet, Gigabit Ethernet and 10 Gigabit speeds for server,
storage and network progressive upgrade; 4 ports SFP+ that
broaden 10 Gigabit connectivity for 1G/10G fiber uplinks and
other DAC connections.
managed, low-latency, line-rate 10G Copper “Base-T” switch
solution; 24 ports 10GBase-T (RJ45) that support Fast
Ethernet, Gigabit Ethernet and 10 Gigabit speeds for server,
storage and network progressive upgrade; 4 ports SFP+ that
broaden 10 Gigabit connectivity for 1G/10G fiber uplinks and
other DAC connections.
The M7100 series is ideal for all organizations considering
reliable, affordable and simple 10 Gigabit Ethernet Top-of-Rack
server access layer and high-density, high-performance 10GbE
backbone architectures.
reliable, affordable and simple 10 Gigabit Ethernet Top-of-Rack
server access layer and high-density, high-performance 10GbE
backbone architectures.