Netgear M4300-12X12F (XSM4324S) - Stackable Managed Switch with 24x10G including 12x10GBASE-T and 12xSFP+ Layer 3 User Manual
Getting Started
19
M4200 and M4300 Series ProSAFE Managed Switches Web Management User Manual
Web Interface Buttons and User-Defined Fields
The following table shows the command buttons that are used on the pages in the web
interface:
interface:
IMPORTANT:
When you click the Apply button, your changes are saved for the
web management session but are not retained by the switch when it
is rebooted. You can manually save the configuration permanently
(see
web management session but are not retained by the switch when it
is rebooted. You can manually save the configuration permanently
(see
automatic saving feature (see
User-defined fields can contain 1 to 159 characters, unless otherwise noted on the
configuration web page. All characters can be used except for the following (unless
specifically noted in for that feature):
configuration web page. All characters can be used except for the following (unless
specifically noted in for that feature):
Interface Naming Conventions
The switch supports physical and logical interfaces. Interfaces are identified by their type and
the interface number. The physical ports are gigabit interfaces and are numbered on the front
panel. You configure the logical interfaces by using the software.
the interface number. The physical ports are gigabit interfaces and are numbered on the front
panel. You configure the logical interfaces by using the software.
Table 1. Web interface command buttons
Button
Function
Add
Clicking the Add button adds the new item configured in the heading row of a table.
Apply
Clicking the Apply button sends the updated configuration to the switch. Configuration
changes take effect immediately.
changes take effect immediately.
Cancel
Clicking the Cancel button cancels the configuration on the page and resets the data on
the page to the previous values of the switch.
the page to the previous values of the switch.
Delete
Clicking the Delete button removes the selected item.
Update
Clicking the Update button refreshes the page with the latest information from the device.
Logout
Clicking the Logout button ends the session.
Table 2. Invalid characters for user-defined fields
\
<
/
>
*
|
?