Netgear M4300-12X12F (XSM4324S) - Stackable Managed Switch with 24x10G including 12x10GBASE-T and 12xSFP+ Layer 3 User Manual

Use MVR Running to Enable or Disable the MVR feature. 

The factory default is Disable.

Use MVR Multicast VLAN to specify the VLAN on which MVR multicast data is received. 

All source ports belong to this VLAN. The value can be set in a range of 1 to 4093. The 

default value is 1.

Use MVR Global Query Response Time to set the maximum time to wait for the IGMP 

reports membership on a receiver port. 

This time applies only to receiver-port leave processing. When an IGMP query is sent 
from a receiver port, the switch waits for the default or configured MVR query time for an 
IGMP group membership report before removing the port from the multicast group 
membership. The value is equal to the tenths of a second. The range is from 1 to 100 
tenths. The factory default is 5 tenths or one-half.

Use MVR Mode to specify the MVR mode of operation. 

Possible values are compatible or dynamic. The factory default is compatible. 

Click the Apply button.

The updated configuration is sent to the switch. Configuration changes take effect 
immediately.

The following table describes the nonconfigurable information displayed on the page.

MVR Max Multicast Groups

The maximum number of multicast groups that MVR supports. 

MVR Current Multicast Groups

Displays current number of the MVR groups allocated.