Netgear M4300-12X12F (XSM4324S) - Stackable Managed Switch with 24x10G including 12x10GBASE-T and 12xSFP+ Layer 3 User Manual
Manage Device Security
581
M4200 and M4300 Series ProSAFE Managed Switches Web Management User Manual
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
do not enter a password.
4.
Click the Login button.
The System Information page displays.
5.
Select Security > Control > Captive Portal > CP Trap Flags.
6.
Select the CP Trap Mode Disable or Enable radio button.
This sets the option to enable or disable the captive portal trap mode.
7.
Select the Client Authentication Failure Disable or Enable radio button.
If you enable this, the SNMP agent sends a trap when a client attempts to authenticate
with a captive portal but is unsuccessful.
with a captive portal but is unsuccessful.
8.
Select the Client Connect Disable or Enable radio button.
If you enable this, the SNMP agent sends a trap when a client authenticates with, and
connects to, a captive portal.
connects to, a captive portal.
9.
Select the Client Database Full Disable or Enable radio button.
If you enable this, the SNMP agent sends a trap each time an entry cannot be added to
the client database because it is full.
the client database because it is full.
10.
Select the Client Disconnect Disable or Enable radio button.
If you enable this, the SNMP agent sends a trap when a client disconnects from a captive
portal.
portal.
11.
Click the Apply button.
The updated configuration is sent to the switch. Configuration changes take effect
immediately.
immediately.