Netgear S3300-28X (GS728TX) - ProSAFE S3300 Smart Switch Series Administrator's Guide
Managing Device Security
261
S3300 Smart Switch
IPv6 ACL
An IPv6 ACL consists of a set of rules which are matched sequentially against a packet.
When a packet meets the match criteria of a rule, the specified rule action (Permit/Deny) is
taken and the additional rules are not checked for a match. On this menu, the interfaces to
which an IP ACL applies must be specified, as well as whether it applies to inbound or
outbound traffic. Rules for the IPv6 ACL are specified/created using the IPv6 Rules screen.
taken and the additional rules are not checked for a match. On this menu, the interfaces to
which an IP ACL applies must be specified, as well as whether it applies to inbound or
outbound traffic. Rules for the IPv6 ACL are specified/created using the IPv6 Rules screen.
To add an IPv6 ACL:
1.
Select Security
ACL > Advanced
IPv6 ACL.
The current number of the IP ACLs configured on the switch is displayed in the Current
Number of ACL area. The maximum number of IP ACLs that can be configured on the
switch is displayed in the Maximum ACL field, depending on the hardware. The name of
IPv6 ACL can be configured in IPv6 ACL field. The number of the rules associated with
the IP ACL is displayed in the Rules field. The ACL type is IPv6 ACL and displayed in the
Type field.
Number of ACL area. The maximum number of IP ACLs that can be configured on the
switch is displayed in the Maximum ACL field, depending on the hardware. The name of
IPv6 ACL can be configured in IPv6 ACL field. The number of the rules associated with
the IP ACL is displayed in the Rules field. The ACL type is IPv6 ACL and displayed in the
Type field.
2.
In the IPv6 ACL field, specify a name to identify the IPv6 ACL.
3.
Click the Add button.
To delete an IPv6 ACL:
1.
Select the check box associated with the ACL.
2.
Click the Delete button.