Netgear GS752TXS - Stackable Smart Gigabit Ethernet Switch User Manual
218
|
Chapter 7: Managing Device Security
GS752TXS Smart Switch Software Administration Manual
2.
To delete a configured MAC Filter, select it from the menu, and then click Delete.
3.
Click Cancel to cancel the configuration on the screen and reset the data on the screen to
the latest value of the switch.
4.
If you make changes to the page, click Apply to apply the changes to the system.
MAC Filter Summary
Use the MAC Filter Summary page to view the MAC filters that are configured on the system.
To display the MAC Filter Summary page, click Security
Traffic Control
, and then click the
MAC Filter
MAC Filter Summary
link.
The following table describes the information displayed on the page:
Field
Description
MAC Address
Identifies the MAC address that is filtered.
VLAN ID
The VLAN ID used with the MAC address to fully identify packets you want filtered.
You can only change this field when you have selected the Create Filter option.
You can only change this field when you have selected the Create Filter option.
Source Port Members Displays the ports included in the inbound filter.
Destination Port
Members
Members
Displays the ports included in the outbound filter.
Click Refresh to update the page with the most current information.
Storm Control
A broadcast storm is the result of an excessive number of broadcast messages
simultaneously transmitted across a network by a single port. Forwarded message
responses can overload network resources and/or cause the network to time out.
simultaneously transmitted across a network by a single port. Forwarded message
responses can overload network resources and/or cause the network to time out.