Netgear GS728TS(B) – ProSAFE 24-Port Gigabit Stackable Smart Switch with 4 SFP uplinks Software Guide

Flow Label: Flow label is 20-bit number that is unique to an IPv6 packet, used by end 

stations to signify quality-of-service handling in routers. Flow label can be specified 
within the range (0 to 1048575).

IPv6 DSCP Service: Specify the IP DiffServ Code Point (DSCP) field. The DSCP is 

defined as the high-order six bits of the Service Type octet in the IPv6 header. This is 
an optional configuration. Enter an integer from 0 to 63. The IPv6 DSCP is selected 
by possibly selection one of the DSCP keyword from a drop-down menu. If a value is 
to be selected by specifying its numeric value, then select the Other option in the 
drop-down menu and a text box will appear where the numeric value of the DSCP can 
be entered.

Click Cancel to cancel the configuration on the screen and reset the data on the screen to 
the latest value of the switch.

To add the new rule to the ACL, click Apply.

To delete a rule from an ACL, select the check box associated with the rule and click Delete.

IP Binding Configuration

When an ACL is bound to an interface, all the rules that have been defined are applied to the 
selected interface. Use the IP Binding Configuration page to assign ACL lists to ACL 
Priorities and Interfaces. 

To display the IP Binding Configuration page, click Security > ACL > Advanced > IP Binding 
Configuration.

To configure IP ACL interface bindings:

Select an existing IP ACL from the ACL ID menu.

The packet filtering direction for ACL is Inbound, which means the IP ACL rules are 
applied to traffic entering the port.